Winchester 1400 Reassembly
Loading...
Link to this comment:
Uploader Comments (willwood487)
All Comments (42)
-
Thanks
-
Nice video's on the 1400. Glad to see I'm not the only one that uses a towel as a counter mat. Never thought of using a roll of duct tape to extract pins, I learned something new.
-
@rlewis473 If you haven't fixed your ejector yet (it's been ten months) I have some insight.
Apparently the pin-type ejector was enough of a problem that Winchester went to a retained ejector. Check around for gunsmiths that can convert yours. I'll be sending mine off to Gander Mtn. when funding permits.
I was sighting in a scope on my 1400 Ranger and the pin came out the left side of the receiver and broke the stock-end of the ejector after 11 slugs.
-
My bro just picked up an MK2 and this vid helped us figure out the disassembly with no problems. Thanks OP!
12:03
Winchester 1400 Disassemblyby willwood48710,452 views- 8:39
80 YARD SHOTGUN CHALLENGE.wmvby willwood4873,582 views
- 0:33
why I dont like winchester white boxby willwood4874,678 views
- 6:40
Savage 110 .30/06 Bolt Disassemblyby willwood487896 views
- 9:39
how to winchester dissassemble and cleanby spartan76537,730 views
- 3:15
winchester 1400by dohcneon1977 views
- 2:06
Jennifer Anistonby Flintchee44,320,104 views
- 1:35
Redneck Prideby warrior4126,384,708 views
- 0:42
Pilot pulls up landing gear while on runwayby CRTukker272,903 views
- 1:43
winchester 1400 20 gaugeby JaliscoMexico906,734 views
- 4 videosFIrearm Cleaning
- 8:18
Winchester Model 1200 shotgun disassembly field stripby jeffshootsstuff27,300 views
- 1:19
Skeet shooting WInchester 1400/ Ruger 44 magnumby my61rag14,113 views
- 9:40
winchester 1200/1300 dissasemblyby spartan76532,091 views
- 2:33
Winchester model 50 Semiauto 12 Gauge Shotgunby keithjarsenault12,607 views
- 10:00
Part 1 of Disassembling, Cleaning, Inspecting, and Lubing the Charles Daly Semi-auto Shotgunby vonnieglen144,133 views
- 4:29
Winchester's Exhibition Shootersby jamesbrian2880,867 views
- 4:24
Remington 870 Reassemblyby tippymaster145,857 views
- 8:25
Mossberg 500, Winchester 1400by gunguru2012271 views
- 1:09
Aimpoint Patrol Rifle Optic (PRO)by GunWebsites17,499 views
- 2:58
Winchester 1200 home defense shotgunby nuthousegaurd29,403 views
how many rounds can the 1400 hold?
stangsaleens7 3 months ago
@stangsaleens7 3 it was designed as a bird gun. gas operated and no plug.
willwood487 3 months ago
@willwood487 now is that in all the models, because there is the 1400, Mk1, mk2, and then they have the 300 ted williams edition. Do they all only carry 3 shells? because i am intrested in buying this very nice looking ted williams 300 and i dont know how steep i will want to go if it only carries 3 rounds, (its about 200 dollars) because i want to use this as a skeet gun, i use a winchester sx3 for most of my bird hunting.
stangsaleens7 3 months ago
@stangsaleens7 yea even the Ted Williams only hold 3 shells as I recall. Designated bird guns only hold 3 shells. on in chamber and 2 in the mag tube.at 200 the 1400 would be a good addition. If you want more capacity look at a different model like maybe a Remington 1100. of course this is my opinion.
willwood487 3 months ago
Scratch that last post. I saw the other comment that if the spring is backward it'll cause that problem. Went down and switched it around and that fixed it. Bolt works normally now. Thanks again!!
roblennis 4 months ago
@roblennis glad it helped you out and I hope you enjoy future vids.
willwood487 4 months ago