fix the cam from 12 oclock to 6 oclock outside the frame fix a block & tackle above the gate @ 12 oclockand fix to the gate, fine tune everything, it will self start. a 5:1 driven by a 4:1 uses almost no energy to lift the gate PIEZOELECTRICS etc works just as well however pricey .WE have NOT ! needed gasoline since 1969. build this device in toy size using ceramic magnets and see for yourself FREE ENERGY WORKS ! skeptics BITE ME !
The guy in the video build it wrong.... The petal is supposed to hit the magnet RIGHT before the narrow V shape. AND is the line right and line left of the magnet opposite, or is it all the same or random, again. Before you people are quick to take that as "debunk" look at how he build it incorrectly. Therefore, his conclusion is a fallacy.
if the bar was suspended from above like a trapeze with a backstop to rest against then the cam could knock it away in a horizontal direction rather than trying to lift it in the vertical.
You can also use a tri pulley that lifts the gate. turn your cam 180 . etc... SEE also antostoof 1s site this is how to make The Archimedes perpetual motion device WORK !
*** Question... Have you seen anyone put three of these onto a common shaft, offset them so that TWO are running "through" their cycle at any given time, pulling the third one through the "problem sticky spot" with no cam or magnets needed... just pure torque from the two going through the cycle! Sounds to simple, but I haven't tried it. Anyone? Thanks! :)
fix the cam from 12 oclock to 6 oclock outside the frame fix a block & tackle above the gate @ 12 oclockand fix to the gate, fine tune everything, it will self start. a 5:1 driven by a 4:1 uses almost no energy to lift the gate PIEZOELECTRICS etc works just as well however pricey .WE have NOT ! needed gasoline since 1969. build this device in toy size using ceramic magnets and see for yourself FREE ENERGY WORKS ! skeptics BITE ME !
perpetualmotion100 1 day ago
The guy in the video build it wrong.... The petal is supposed to hit the magnet RIGHT before the narrow V shape. AND is the line right and line left of the magnet opposite, or is it all the same or random, again. Before you people are quick to take that as "debunk" look at how he build it incorrectly. Therefore, his conclusion is a fallacy.
JayTsunDayVis 1 week ago
if the bar was suspended from above like a trapeze with a backstop to rest against then the cam could knock it away in a horizontal direction rather than trying to lift it in the vertical.
ultrainfinite 2 weeks ago
@rkaztec7 sounds like a good idea
johnshepherd2011 2 weeks ago
you could fill the drum with hydrogen
fuzzynostic 3 weeks ago
You can also use a tri pulley that lifts the gate. turn your cam 180 . etc... SEE also antostoof 1s site this is how to make The Archimedes perpetual motion device WORK !
perpetualmotion100 3 weeks ago
*** Question... Have you seen anyone put three of these onto a common shaft, offset them so that TWO are running "through" their cycle at any given time, pulling the third one through the "problem sticky spot" with no cam or magnets needed... just pure torque from the two going through the cycle! Sounds to simple, but I haven't tried it. Anyone? Thanks! :)
rkaztec7 3 weeks ago
Needs counterweights.
Steve042176 1 month ago
complete garbage
spektor500 1 month ago
очень слабая , только посмотреть , как она собирается крутит генератор
spektor500 1 month ago