Nintendo Wii Mod for 4.3U ONLY!
1. Be sure to always move content to root of SD card.
2. Disconnect any memory card or GCN controller from the Wii.
3. WiFi connection should be enabled
Part 1:
Installing Homebrew Channel
-List of requirement to install homebrew channel;
1. SD Card (I use a 2GB, but a smaller one can be used)
2. Super Smash Bros. Brawl (no way around this, so you'll have to buy the game)
3. Of course, Nintendo Wii running 4.3U (only intended for 4.3U)
-Now that you know what you need, let's start by downloading and moving HBC files to root of SD Card.
-Download files from here: [http://www.megaupload.com/?d=NLABOTE7]
-Once again, be sure to add files to root of SD Card.
-Now turn the wii on (don't insert the sd card, yet)
-Insert Super Smash Bros. Brawl
-Navigate to the Vault
-Now over to Stage Builder
-Be sure to delete custom stages. There should be none on there.
-Go back out to Vault, insert SD Card and once again go into Stage Builder.
-At this point, once you enter State Builder, it should take you into a black screen.
-Once HackMii appears wait a few seconds and you will be prompted to press 1.
-Now on HackMii installer, click on Homebrew Channel and install it. HackMii is optional, so you don't need to install it. *Remember to install homebrew from SD CARD*
-Once installed, exit. Now you have The Homebrew Channel on your Menu.
Part 2:
Installing USBLoaderGX
-Download files from here: USBLoaderGX [http://www.megaupload.com/?d=7RRPAWRV] (extract with WinRAR)
1. Be sure all files go to root of SD card
-Run homebrew channel
-Run "IOS236 Installer/Uninstaller" ; Press 1 to install IOS236 and wait for the message on the screen "Getting IOS36 revision 3351"
Now, select the option "Load IOS from SD card." When installation is finished, press any button to return to HBC.
-Now, load the "CIOS rev20b Installer" app and choose the IOS 236 on the first screen using the D-pad and
button A. On the selection of IOS base, choose the "IOS56 v5661" , then "IOS 249" , then "WAD Installation" and then, "Wii SD Slot"
When installation is finished, press A to continue the process. Now you'll have to install the IOS250.
Again, you'll have to select IOS Base, and select "IOS38 v4123"(but this time install IOS250 instead of IOS249) and then again, choose "WAD Installation" and "Wii SD Slot." When finished, press any button to return to HBC.
-Now to install USBLoaderGX as a channel (and not have to run it from inside HBC) you will do the following;
-Run "WAD Installer 1.7" from HBC
-Select IOS249 and select "Disable" for the NAND option, then Wii SD Slot --search "wad," then select
the "USB Loader GX-UNEO_Forwarder.wad" and install it. When installation has finished, press B and then HOME to return to the HBC.
-Now you can load the USBLoader GX from the Wii Menu.
**USE WBFS MANAGER TO LOAD ALL ISO. GAMES ONTO AN EXTERNAL HARD DRIVE SO YOU ARE ABLE TO PLAY THEM ON THE WII**
This is for educational purposes only. I AM NOT AT ALL RESPONSIBLE IF YOU SCREW UP YOUR WII!
I know everyone's been asking this, but, how do you have so damn many games? Don't tell me: External Hard Drive. Rich bastard...
Pooper2471 1 month ago
not rich. ext hard drives are cheap.
thetechdude7 1 month ago