WE 3 PX4 GBB Airsoft Pistol Review - RFR Episode 32

http://www.pyramydair.com/s/m/WE_3-PX4_Custom_Airsoft_GBB_Pistol_Black/2576?u...
The WE 3 PX4 comes with adjustable grips, easy access to clean and adjust your hop-up, and the ability to mount your favorite flashlight or laser sight. RFR review the gun's accuracy, velocity, and tell you of their favorite features of the gun.

Category:

Gaming

Tags:

• airsoft
• review
• gun
• pistol
• gbb
• gas
• propane
• pyramyd air
• rfr
• rapid fire review
• episode
• bb
• pyramidairsoft

[randomocityvideos]

Great review! But just wondering can you put a silencer on it?

[pyramydairsoft]

@randomocityvideos Not right out of the box. I don't know that any of the manufacturers have aftermarket parts for these guns available yet. It's a shortened M9 platform though, so it may be compatible with M9 barrels.

Thanks,

The Pyramyd Air Team

[MrJmak223]

Good vid. I have a few questions. Is the gun compatible with marui PX4 Magazines, and will it be compatible with a marui lower frame and hop up unit?

[pyramydairsoft]

@MrJmak223 Should be. The Marui PX4 is probably what WE/HK3P used to reverse engineer their model.

Thanks,

The Pyramyd Air Team

[Zoidsguy11]

When are the extra mags coming in?!

[pyramydairsoft]

@Zoidsguy11 have you checked out website recently? We keep our pages updated with the most up-to-date estimations on product arrivals, which are provided to us from the manufacturer. - Pyramyd Air Team

[TacticalReviewer]

These reviews are great! I like that you go over all the features in depth in all your reviews and the quality of them are good. I would buy these guns from your site but I've found other sites that are much easier to use, I would recommend tuning up your site sometime soon I'm sure it'll raise you online sales.

[ifishupright]

This is the most misconceptions of this "WE" PX4.

It's not WE, it's a hong kong manufacturer called "HK3P" which made a direct metal slide for the marui version but soon later created a clone which is the same except that the slide and internals are mainly metal instead of plastic.

[SolaceGrayArc]

@pyramydairsoft

Would it be able to take an M9 mag? I know there are a few M9 CO2 mags on the market...would that work?

[haplo0879]

@ablahblah54 thanks for the good info!

[ablahblah54]

Okay, soo...from ASGI mine came with a weared out slide and the blowback mechanism's stopper well, blew off (see what I did there) after a month of usage on duster gas. This is ridiculous, and nowhere near ASGI quality. However, I see this one guy on Evike with what appears to be a similar issue. Suspicious...oh well, I'll just have to go and find myself a genuine TM slide to be safe then.

[ablahblah54]

@haplo0879 The valve knocker engagement latch is extremely annoying on the WE PX4. Tthere's this silver piece sticking up on the body that the slide engages when racked. That piece lets the valve knocker fall to firing position. After decock, (pulls knocker and silver piece up), the piece should drop down again on a hair (should drop down on a DA pull as the hammer lets off the knocker), though mine doesnt engage at times like yours. Best I'll do is open it up, lube, clean (too much oil = bad).

[STMaster95Z]

@haplo0879 Maybe you should try lubing the internals a bit. Hope this helps.

[haplo0879]

My PX4 is no longer working properly. Once I switch from fire to semi using the decocking lever, I now have to rerack the slide to get the gun to fire again. A double action or single action trigger pull will not make the gun fire without reracking the slide causing a double feed. Any thoughts on what might be broken so that I can order a replacemant part?