10 Ton Hydraulic Press for Pressing Tungsten Heavy Metal

10 Ton Hydraulic press from http://www.abs-products.com for use in engine rebuilding and engine building. Press in Tungsten Heavy Metal in to crankshafts, remove harmonic dampeners wrist pins, and all standard uses for a hydraulic press.

Category:

Autos & Vehicles

Tags:

• Broaching
• Keyways
• Hubs
• harmonic
• balancers
• wrist
• pins
• heavy
• metal
• crankshaft
• balancing

[ABSProducts]

Yes, we're in Orange County, Brea to be exact. Feel free to give us a call if you have specific questions about this tool or any of our other tools. You can reach us 714-671-0728. Thanks, Gary

[CapitanBizarrely]

Very imPRESSive.

[kkustomz1]

There should be no need to press balancers on or off in a press?

[maykee12]

im from Philippines..

want to buy heavy metal tungsten from u..

thanks and god bless



[dougspair]

@ironman2712 That's air-over-oil pump...on the bottle jack...

[MOMMY2ACDHSURVIVOR]

Nice demonstration, but you would never put a balancer on that way. It has to pass through the front cover and seal when you assemble the short block.

[HawaiianMachinist]

I'm opening up a machine shop in my garage & I'll need a press for broaching.

Do you have 1 rated @ 20 tons? Just asking...I can get away with 10 ton...

[rupertmja1]

Hi there, I am interested in learning about rebullding 2 stroke cranks that are pressed up. Any idea what press I would need - I already have one similar to yours.

[ironman2712]

it sounds as if it was hammer action press

[7olusegun]

Nice way to spend away time pa.

[edosmamacias]

Saludos desde Colombia.

Hermosa tu maquina.