How to Install and Plumb a Double Bowl Sink: Part 2 Landlo

A repair that comes up from time to time is installing / replacing the kitchen sink. In Part 2, we have our sink installed on a fresh countertop, now it's time to plumb our PVC drains and add the water feed lines. Landlord Lessons: - Don't put too much plumber's putty on your baskets, or you won't get a water-tight seal. - When buying drains, I prefer PVC. They are cheaper and won't rust on you like Metal. - Finger tighten your PVC drain joints. You don't have to tighten too hard for a good seal, and if you tighten too hard, they will crack.

Category:

Entertainment

Tags:

• blip.tv

[LandlordingTV]

Absolutely Old Kid! Like I say in the video, you trace out the sink, then measure IN 1/4" to 1/2" so the sink can rest on the countertop.

Thanks!

[terryarnold57]

I want to thank you so much for your video, I am doing a plumbing job tommorow and your video has realy helped me out a lot, thanks.

[cindyle100]

thanks very much for your tip

[hurcorh]

what the random music

[TheOldkid888]

When installing a kitchen sink;NEVER cut out the enitre countertop where the faucets go through.That section should NOT be removed as the crows feet that hold the faucets in place have nothing to hold onto.Tightening them up against the stainless steel sink will not allow the faucet to hold firm.When installing a sink;always use the template that is provided with the sink for cutting out purposes....good luck and have a good day