Wii Rifle gun - C7 - Version 2 + COD - BLACK OPS gameplay

*english below*
Musique: Combichrist - Get your body beat

Voici la nouvelle version améliorée de ma C7 de Wii. Les boutons de la Wiimote étaient trop loin de mes mains pour être pratique.
J'ai donc entrepris d'ouvrir ma wiimote et d'y souder plein de fils. J'ai ensuite acheminé ces fils jusqu'au chargeur. Dans le chargeur, j'ai intégré les contacts et boutons d'une vieille manète de playsation 2. Ohhhh! Là on peut dire que ça clanche!


This is my new and improved version of my original Wii C7 rifle. I realized that the buttons were hard to reach all the way at the front of the rifle on the wiimote.
I ended up opening up the wiimote and solderind a whole bunch of wires. I then routed these wires through the rifle, all the way to the magazine. In the mag, I integrated the contacts and buttons of an old Playstation 2 remote. Now, all the buttons are close at hands! Ohhh! This is kicking some serious ass!

Category:

Gaming

Tags:

• homemade
• COD
• Black
• ops
• wii
• gameplay
• M16
• AR15
• fusil
• carabine
• rifle
• gun
• assault
• hot
• cool
• violent
• deadly
• sniper
• sureshot
• 5.56mm
• AR-15
• MOH
• call
• of
• duty
• FPS
• dead
• space
• resident
• evil
• dark
• side
• chronicles
• heroes
• wood
• combichrist
• craft
• project
• DIY
• killstreak
• série
• de
• victimes
• zapper
• call duty
• modern
• mw2
• cod4

[dboii2011]

This is by far the greatest homemade wii gun ive ever seen. it destroys the wii crossfire. haha. Good job bruh. How much time did all that take btw?

[Subtorch]

@dboii2011, Thanks a lot. It took me about a week for my first version (see my other vid) and it took me another week to upgrade it to V.2 (with the buttons intergrated in the mag). I couldn't find anything good on the net, so I decided to make my own. It ROCKS!!

[videogameprof]

That looks so CLEAN! sweet im so doing this! instructions? amazing job!

[Subtorch]

@videogameprof Thank you so much. I dont have a tutorial up for this but if you'd like, I'm willing to answer any questions you have.

If you dont know where to start, I'd say, start by selecting the gun model you'd like to make. I chose the Canadian C7 for personal preference. I printed a side view of it on paper on a scale of 1:1 (life size). Then, I traced it on my piece of wood and cut it out. This is the main body. After that, just add/carve other peices to the right thickness and shape.

[Subtorch]

Thanks for the comments!

I wouldn't be able to revert back if that's your question. I had to modify the exterior shell of the Wiimote to allow the wiring to pass through. Also, all my wiring is soldered to the main board of the Wiimote.

I knew that ahead of time so that's why I ordered a wiimote from ebay (it's cheaper this way), just for that purpose, knowing I would modify it permanently. Good luck with your project if you intend to build one. Let me know if you have any other questions.

[Davmm96]

maitenant va t'acheter un airsoft. sa va etre ben mieux

[Subtorch]

Ça marche trop bien. Pas besoin. C'est à cause de mon handicap de supériorité lol.

[BacaCbR]

yes this is very good staf it's battlefield 3

[ohmeisonyeah]

Woooooaaaaaahh Thats Really Nice! But Did You Break Your WiiMote?

[Subtorch]

Thx man! It made the Wii a whole lot nicer to me anyway.