Canon CLI8 and PGI5 Refill / Reset Instructions by Uni-Kit

More instructions at: http://www.uni-kit.com/support.htm
How to refill and reset Canon CLI-8 and Canon PGI-5 cartridges using the Uni-Kit inkjet refill kit and Uni-Kit Canon CLI8 / PGI5 Resetter. The CLI8 and PGI5 canon cartridges have a chip which recognizes the ink level in the printer and issues a disabling error message when the ink cartridge is emptied. This Canon CLI8 chip can be replaced with a new chip, or it can be reset with a Uni-Kit Canon resetter. The Canon resetter by Uni-Kit can be reused and will reset unlimited Canon chips.

Category:

Howto & Style

Tags:

• canon
• resetter
• cli8
• pgi5
• refill
• instructions
• kit
• ink
• refills
• cli-8
• cli
• pgi-5
• chip

[rabigjr]

cartridges chip for sensor level?

[easygroup]

We recommend resetting the OEM chip, we have a Uni-Kit Resetter for the Canon CLI8 and PGI5 (see video, last part)

[snake300123]

were can i buy one of these refill kits?

[easygroup]

Google "Uni-Kit Canon CLI8 refill"

[Printmarcas]

ip4600 ???

[easygroup]

Canon ip4600 uses the Canon CLI221 / PGI220. They refill the same way as the Canon CLI8, but we dont yet have a resetter for the chips on the CLI221 series

[Dean66Essex]

this is the best way to refill you CLI cartridges....forget all the other methods !!

[Dean66Essex]

i have seen various ways to refill the CLI cartridges and found this to be the best way, however i reset the chip before i refill, this stops any ink spilling out if the hole isnt properly sealed,

Also make sure you have a syringe needle long enough to reach the end of the tube inside the cartridge, i know it shows you to refill the empty ink tank this is important, if it refills into the sponge it causes alsorts of mess. Nice video too..

[easygroup]

The ip4600 uses CLI-221 / PGI-221, which are not yet resettable with the Uni-Kit resetter for Canon (Uni-Kit is working on it). Suggest you buy new chips, they are now available

[kuyung79]

thanks info