Tissage aux cartes

Tutoriel sur le tissage aux cartes, création d'un motif simple

Category:

Education

Tags:

• medieval
• tissage
• carte
• historique
• tutorial
• tablet
• weaving

[Khamomil]

4

The key to this method is to understand you can shift card -ORDER, which allows you to warp all similar thread cards in succesion and then shift them to their proper place in the pattern; and

- POSITION so that if 4 cards have only 1 light thread but in all different holes you just have to turn each card to place that thread where it should be.

It is a mistake to write ABCD on the holes, because they get their letter only when all the warping has been done!

[Xargosss]

Thanks a lot for those tips, I'll try this next time.

[jerwife3]

I would adore to have this video dubbed over with English... It is the most wonderful and efficient explanation of tablet weaving that I have seen.. Thank you so much...

[Xargosss]

Done :)

[Alexa666Gri]

Сложно... :(

[Xargosss]

Did you say difficult ? If so, I hope the english version will help you more.

[lothrop53]

awesome job!!



[Bast4ever]

alors là il y a une énormissime erreur..... à la fin, pour le tissage, il faut passer la trame quand les cartes sont en position diagonale, de maniere à avoir un seul fil au dessus et 3 en dessous. sinon le dessin est faux! une case du dessin correspond à un fil, et non à deux!

comme c'est montré ici, il y a 2 fils au dessus, et 2 fils au dessous...

[Endorath22800]

Merci pour ce tuto très clair. Mais attention au "malgré que"...

[Khamomil]

3

In your ex cards 7,8,10 and 11 have 1 light thread . Now you only need to rotate the cards so that the light thread is in the position it should be, A B C or D.

This is a way to save a lot of time and frustration because you don't have loose ends of thread but you need a loom where the bars are attached only on one side. You can use clamps (joints de serrage). All is explained in "Tablet Weaving Magic" by Otfried Staudigel . Just this time saving method is worth the price of the book.

[Khamomil]

2

... and attach one light thread, then you go back and forth from A to B as many times as there are cards with 1 light thread and 3 dark. Next you attach 1 more light instead of dark according to pattern, whether alternate or contiguous, and continue until you have done all cards needing 4 light threads. When done you attach the end to the starting group of 4 threads. ONLY then do you position the cards according to pattern as to

1 color,

2 S or Z

3 starting position...

[Khamomil]

1

If you were using the continuous warp method I mentioned you would ignore the hole letters for the time being. You would stack all cards and pass dark thread in the 4 holes and carry the stack of cards with the thread passing thru them from one end of the loom to the other and put 1 card each time in the weaving area incl. on the return trip from point B to point A. When all the tablets needing 4 dark threads are in the weaving area you cut the thread before reaching point A ...

[Khamomil]

Votre vidéo est très bien, cependant l'ourdissage circulaire est bcp plus facile, il suffit d'enfiler chaque trou à travers toutes les cartes entassées au début, et quand il faut changer la couleur on coupe le fil à la base et on change la couleur. A la fin on attache les 2 extrémités de 4 fils chacune et le tour est joué. Mais on ne peut pas le faire avec tous les métiers, cepdt cela gagne un temps fou! Voyez la video de Linda Hendrickson où elle fait une démo.

[T3hJones]

Great video! I've never tried tablet weaving in a loom but now I gotta try it.