True 5 axis cut, awsome part too!!
Loading...
Uploaded by jbcourt31 on Jul 18, 2011
Milling a 3d chamfer with a trunnion. 5 axis
- 7 likes, 0 dislikes
-
Uploader Comments (jbcourt31)
Top Comments
-
Why do tosspots like this guy feel the need to pump up their little lives with comments like this. You've not only stated the obvious, but demeaned anyone who might be intrigued and feel they could give this trade a go and anyone who might be working or training within this industry. This trade is never a "piece of cake" and this is much more than "middle level" programming. Get your head out of your arse little boy and stop trying to make up for being the workshop bitch.
1 month ago 5
All Comments (7)
-
3 DAYS!!! wtf?? dude.. mastercam x5
-
From a programming knowledge/skill perspective, would this be considered advanced level, very advanced, or black belt 6th dan cnc programming? Is that 3 whole working days sitting at a computer programming time ? Thanks.
-
how long did it take u to write that program ?
- 0:59
5 Axis Engine Block Millingby OSGEUROPE33,912 views
- 0:31
OPEN MIND hyperMILL 5X CNC machining of Engine Head on OKK Machineby OpenmindhyperMILLuk37,678 views
- 1:17
Power-Feed+ End Millby IngersollCuttingTool8,813 views
- 2:28
KORLOY-Laser Millby yingtai78913,590 views
- 1:45
Haas Trunnion 5 axis Stitchby jrygus4,328 views
- 0:42
What not to do with your CNC.by eleehcsleoj278,941 views
- 0:06
aziz zayerby azoooz2513,724 views
- 4:04
One of the biggest lathes you'll ever see.by therealtony106,305 views
- 0:17
One wrong way to unload a bridgeport clone from the trailerby dareposte18,852 views
- 2:55
Mazak Integrex i-630Vby JohnHartPtyLtd3,197 views
- 2:08
Revolutionary High Speed Milling Technology Boosts Feeds And Speeds Up To 10Xby HighSpeedMilling12,384 views
- 1:13
CNC Machine Tool Endmill Crash Oopsby nofalloff35,917 views
- 2:00
HAAS VF-5 5 Axis CNC Swarph Millingby ShibbyImpalaShibby14,667 views
- 8:47
RADIO CONTROLLED JETSby RADLETT272,755 views
- 0:38
Mechanische paradoxby francoismolin61,182 views
- 0:53
Build Your Own Toolchanger 1by jwvica0112,982 views
- 0:16
5axis impeller machining on a haasby pdmcnc28,159 views
- 0:54
5X Cavity machining with OPEN MIND hyperMILLby OpenmindhyperMILLuk11,891 views
- 1:33
High Feed Trigaworx in 1.2343 / H11 / X38CrMoV5-1by PokolmKnowHow3,577 views
That is Middle level programming skill.
If one works on the shop floor running CNC and setting up CNC for many years they will have great understanding of how the technology works. Making programming a piece of cake.
jbcourt31 1 month ago
3 days. What your seeing is only the roughed part. The finish part is much cooler.
jbcourt31 3 months ago
3 days
jbcourt31 3 months ago