Parkfun Fusion - Hobbyking HXT 2835 Brushless Motor Mod Test

Converted a stock (400 type motor) Parkfun Fusion into a brushless and reliable aerial photography platform. It's a 4-channel copy of the EasyStar with functional ailerons. Hope to move towards FPV if I don't have any bad accidents!

Follow link for full details;
http://rc-playground.blogspot.com/2010/05/parkfun-fusion-brushless-motor-mod....

Or click here for the Hobbyking motor:
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=5203&a...

Category:

Autos & Vehicles

Tags:

• Parkfun
• Fusion
• Mod
• Brushless
• Motor
• Easystar
• HXT
• 2835
• (380S)
• 2200kv
• Inrunner
• hobbyking

[outbackjack1974]

Contact!

[seemonseemonster]

Hi there, what's up? need some details? try the blog link in the description, or reply here if it's something not covered. :)

[outbackjack1974]

@seemonseemonster I'm just browseing and looking for a good plane. I've Flown heli's but never a plane. So I'm looking to build one soon. We I have a Parkzone Super Decathlon 35", someone give me, but the ESC is toast. So I was looking at getting some electronics, and either scratch builing a plane from foam, or get a kit. I'm not sure what to do yet. Yeah your plane went across the floor, and I said, "Contact" like in the old days when they would spin crank the real planes buy hand. "Contact"

[seemonseemonster]

@outbackjack1974

Hi Jack. Ok, i get it now! :)

Check out the combo I ordered from hobbyking. The breakdown is in the blog link. I can also recommend the Turnigy Plush ESCs from there. They are super cheap and really reliable. I have also bought 2 of their 2.4 gig 6 channel radios. Again, super cheap and reliable.

[outbackjack1974]

@seemonseemonster I like your website, and I'm going to go back and check out those details more closely. I'd like to get a plane like yours rear motor type. I got a buck of good stuff to day. (4) 3S 11.1v 1000mah lipos. (2) 30 amps esc's. (2) Park 400 Brushless motors, + props and adapters. Also (4) EXI 9g Metal Gear Servos, and a nice Thunder AC6 lipo charger. Now I either need to get a better plane, or buy some foam build me a foam cutter, and go to town. I got all that stuff for $155.00

[seemonseemonster]

@outbackjack1974

Hi again. Another great one is the AXN floater Jet from the same hong kong site. It's got ailerons as well. Looking forward to see your choice and then flight vids :)

[seemonseemonster]

Ha ha, luckily no! :)

[emzetFPV]

broken wing?