Supercharged FG GT Falcon by Horsepower Factory
Loading...
Link to this comment:
Uploader Comments (HPFperformance)
All Comments (14)
-
Oh,btw, my own Kenne who kit on a 9.2c/r Boss makes 460 rwkw on 11psi.
-
Hahahaha, Kenne who? That would be Kenne Bell. That engine is being fed 11psi for 350odd rwkw??????? Guess that's a great example of blowing a hi compression Boss engine. 13 or 14 grand for 100rwkw sucks big ones.
-
Thats a nice silver on that GT!
Lovely figures there too!
-
BPT in Perth have full R&D whipple kits and are getting 400+ rwkW with 10-11 pounds so let's not get excited. I ran 9lbs of Kenny Bell on an AU5l and pulled 306rwkW (see Perth Street car mag) - Kenny Bell are all over whipple - more efficiant and run cooler - just ask the Mustang boys in the US.
-
What sort of results are your customers with this kit getting on the qtr?
-
Kenne who?? HA! ... its ok mate I'd be upset too since the KB makes more power with less boost and with a whole lot more puff left in the bank
-
kenne bell sounds more hectic
1:29Supercharged 426 Hemi SRT-8 Dynoby blownhemi42,715 views
Featured Video- 0:39FORD FPV FG GTP XForce quad tip full SS exhaust...by Thebishman18,817 views
- 0:27FG GT Accelerationby 315GTPilot18,518 views
- 1:11SUPERCHARGED FG GT DYNOby samkactus6,146 views
- 1:332010 FPV GT with Extractors and full stainless ...by lockav15,694 views
- 0:46FORD FG GT RUNS 11 SEC PASSES AT SYDNEY DRAGWAY...by FPV097GHIA9,068 views
- 2:30Supercharged Ford FPV Uteby samkactus9,551 views
- 1:20Harrop XR8 - Standing 400m - Motor Hot Tuner Sh...by HarropTV5,011 views
- 2:20FG GT Boss 335 Intune motorsportby intunemotorsport3,969 views
- 0:34Ford falcon xy gt going sideways must seeby sabri244246,705 views
- 2:40FPV F6 310 vs HSV R8 317by SGD1982235,197 views
- 0:12fg fpv gs 0-100by xr8man837,558 views
- 0:38Supercharged FPV GT Dynoby broke12330,637 views
- 0:26OzGarage Promo - 1500hp...by HPFperformance181,067 views
- 4:15SUPERCHARGED FG GT ROAD TESTby samkactus28,989 views
- 2:35FPV GT Supercharged 335kw FGby CAPPHOTOGRAPHY117,005 views
- 0:46CoP THiS FORD FPV GS 2009 all new falcon "SPEC...by falconGTHOPHASE48,414 views
- 0:34Re: falcon GTHO PHASE 4 CATCHER 1972 XA INTERCE...by falconGTHOPHASE442,923 views
- 2:24CR4ZY FG GT-MONSTER PERFORMANCE MACKAYby MONSTERMACKAY3,592 views
- 0:10Xtreme Ford Tuning FG F6 813 RWHPby XtremeSimon15,838 views
Bluepower Racing Developments do a 10 grand kit drive in drive out for FG XR8's and im sure for all Boss 290 motors that makes 410rwkw on 9 or 10psi, thats on a Kenne Bell 2.6 :D
james710nur 2 years ago
Would be interested to see what this kit would make on our dyno.
HPFperformance 2 years ago
Even if they dont make 250 standard on your dyno, you have made 125kw/11 = 11.4kw per psi. I have seen "290" GT's make a 180rwkw gain from 230 to 410rwkw back to backed on the same dyno which equates to 18kw per psi. I just dont think the 315 is as good with a blower.
KB's claim of 11-13hp per psi is a change of boost increase when the car is already boosted. Going from naturally aspirated to boosted will bring bigger gains initially, and as you add boost the return diminishes.
4964fxc 2 years ago
Thanks for the info on the boost increase.
I think you may be right on the 315 with forced induction, whilst you definitely can force them, they are not as well suited at the 290/260 motors. Having said that for the change in how they drive, ALL these motors are made for forced induction!
HPFperformance 2 years ago
Kenne who?
Kenne Bell.. you know, the blowers that own ALL the Modular records in Australia!
351rwkw is pretty pissweak for 11 psi, they make 250rwkw standard. I wouldnt waste my time..... sounds nice though, must be that DiFilippo exhaust.
4964fxc 2 years ago
The Kenne who was a light hearted joke.
Firstly they dont make 250kw standard, definitely not on our dyno, but that another argument.
Look at the gain, 125kw, can't be that bad if KB themselves quote only 11-13hp per 1psi which equates to considerably less than 125kw.
HPFperformance 2 years ago