rcheli parallel charging
Loading...
Loading...
6:28
Parallel charging 3x 3s packs with a kinkby tjinguy6,629 views- 2:40
Parallel Charge Board Demonstrationby write2dgray11,616 views
- 2:39
How To: CNC Foam Cutting Machine. Part 2 ProTek 1010b+ Charger (with Foam Cutting Software)by rcuniverse4,958 views
- 2:10
RC Charging Stationby neilgreene1,987 views
- 2:37
HobbyKing $3 Lipo Balance and Voltage Checker Review!by RedDevilSquadron10,047 views
- 0:57
li-po battery charger balancer, multiple batteries EK2-0851 charging stationby MrVinteakias6,180 views
- 8:05
A Beginners guide To Lithium Polymer Batteries for RCby RTatBstoke10,434 views
- 4:08
Hyperion EOS1420i NET3 connecting sequence for dual pack chargingby skyhobbies3,020 views
- 1:58
Voltz 6250 - 250W Synchronous Balancing Chargerby RevcoRC3,272 views
- 3:34
Tech Tips 3: Recovering a Deeply Discharged Batteryby OptimaBatteries33,161 views
- 2:02
Parallel Charging 6 LiPo Batteries Using iCharger 206Bby write2dgray52,109 views
- 2:44
Lipo Safe Charging and Storage Bagby CommonSenseRC79,836 views
- 1:27
iCharger i106b+ Balance Charge.mpgby Gr33nBar0n2,058 views
- 9:29
RC Parallel Battery Charging For Lipo RC Batteriesby rcnightmare15,124 views
- 11:05
RCSpeak.com Parallel Lipo Charge Board Reviewby JettaManDan091,502 views
- 3:49
Charging a lipoby Johnny3333333333,497 views
- 1:49
Turnigy Accucell 6 LiFe/LiPo NiMH/NiCd Lead Acid Chargerby MrBlowmyselfup28,411 views
- 1:18
Faulty Turnigy 420 Lipo Chargerby saqmaster2,797 views
- 1:14
RC Heli Instructional Video - Flight School Introby wrprince115,110 views
I have a triton with charge threw ballance leads.My charger is 4cell max at 14.8.Now if I charge 2 3 cell 2200 ma will I be over voltage like I was charging a 6s or would it be the same 11.1 with double the ma.So on 2 2200 3 cell packs it would read 11.1@4400ma.Or would it be 22.2volts..Trying to get more from my chargers.22.2volts=series/11.1 volts parallel with 2 3 cell lipos correct?
justmerichie 3 months ago
@450hp202turbo yay it works thanks
450hp202turbo 4 months ago
just about to try doing this with 2s 5000s i couldnt work out the balance ports error message..with the 206b thanks for this dude much help cheers
450hp202turbo 4 months ago
@xxgg
The mah does NOT have to be the same. Just the cell count. That is if you are charging them through the discharge lead. You can charge differnt cell batteries if you are only charging through the balance lead. This means that the main lead is not plugged in. Some chargers can not charge without batteries being plugged into the main lead. I like to charge batteries that are within 1/2 volt of each other. My lvc on the esc keeps my batteries close
tahoeskiier 7 months ago
One more thing, when charging all lipo must be same cell#? Must have silmilar voltage level, but can mix and match any MAH size? Fischarge C rating doesn't mayter, right?
Just adking again because other videos about parallel charging says that even MAH should be same.
xxgg 9 months ago
So lipo in a parallel mode will effectively double the total amp output too, right?
For example, two 3s 1000mah 40C lipo in parallel = 80amps output?!
xxgg 9 months ago
@xxgg Yep, you just add up the mah of all the packs. 1000 + 2000 = 3000 (3 amps, for a 1C charge rate).
JustPlaneChris 9 months ago
Excellent vid partner, what size power supply are you using?
allabouthim03 10 months ago
Question:
What if you are parallel charging two LiPo with different Mah? say 1x1000mah & 1x2000mah? I would use 3AMPs setting on charger ?
xxgg 10 months ago
Lets say I have a (6x) parallel board and 6x 240 mah blade mcp x batteries hooked up, how many amps do i need to put on the charger? Any help appreciated, I have no idea what to do!
mrldc2u2 10 months ago