Why is my Viewsat doing this?

Here's whats going on after I installed my Viewsat..

Why is it doing this?

Category:

Howto & Style

Tags:

• Viewsat
• 2000
• Ultra
• VS2000
• satellite
• dish
• install
• FTA
• free
• to
• air
• freetoair

[gorrime]

nimiq 1.3 91.0W does not works with universal lnb. mojothepoomonkey is absolutely rite. you can use ( single, dual, legacy, twin quad, dish pro, dish pro plus or others but not universal for nimiq 1)

[rogerbelanger93]

THats not what was causing it to jump like that though... Although it's still on universal and works fine... well, when it's not down like right now GRRR

[rogerbelanger93]

you guys were all wrong... as soon as I put it on the roof, where it had a clearer view of the sky, it worked perfect...

thanks anyway

[07Warrior13]

Alien ship interference.

[abd212004]

check ur cables

[andersonlavor]

change your

lnb type to Standart

Lnb high to 11250

lnb low to OFF

thats it.. you`re good to go...

see you

[SkaterRudy45]

i t can be from the cables to the satelellite to the viewsat

[liberiason]

i dont thing your satelellite settings should be on nimiq 1.3 97w. i thing should rather change that to ecostar if bell-vu is you provider. 60s should work but that not too good

[leynieryandirie]

trai 11250 LNB fracuenci

[westcoastpunjabi2]

yo smokeyg831 i have a viewsat 2000 ultra and the indian channels dont work. i have it on 63.5 west. all the Chinese channals work. help me ASAP

[jeffnightowl]

I've had a vs extreem and its done that since day one. I think its just a glitch when it;s trying to lock on to a transponder, Mine always scanned fine and no stuttering while watching. So if you don't have problems watching then leave it..

[smokeyg831]

i had the same problem and i fixed it i didnt cut nothing and i didnt have to repoint me sat to get channels.

lnb power: on

lnb type:universal

tp freq:122282(satechostar 7) needs to be changed to match the sat you want to find.

diseqc 1.0: port1

hope this helpped, if you need more details ill be happy to try to help.

[cmartin8888]

YOu do not have a strong enough signal. You have to realign your dish until you get 75% or better (85% or better is what you should be shooting for and is easily attainable) but 75% will work. If you can achieve this, the satellite will lock on nim91 and the erratic percentage should disappear. As I look at this you are not locked on the satellite. You know you are locked when a nim91 banner appears above the satellite you've selected in the list-give it a try