Trex500 3D Street
Uploader Comments (Jaemen1)
All Comments (10)
-
This is not "3D"....rolls and loops are "sport".
-
HI Craig.
Towards the end of the flight (around 1:50), when you switch back to Normal flight mode (I'm assuming) what is your headspeed at? That seems like a very tame normal setting for back yard cruising. I'm still in the process of setting up my radio so not sure what to program normal mode to.
Mind posting your Throttle/Pitch curves for whatever flight mode you were in starting at 1:50?
Thanks!
-
Nice machine but I would like to clarify something about 3D. What you are doing is called aerobatics, not 3D, an aeroplane can roll, loop and stall turn, thats not 3D is it... heli 3D is moving the machine on all 3 pivots at the same time..e.g.. The chaos manourver...true 3D flying. In other words...aileron, elevator and tail all in the same move either in 180 degrees or 360 degrees. Once again, nice flying.
-
but i haven't enough money...
-
antenae
-
Nice flight and what a great machine Craig! I want one tooo!! lol
-
what do you mean "aerial"?
-
nice smooth flying bro!
What's that blue cord hanging from the tail? anti static rig?
wonderbread57 3 years ago
It's fuel tube which I use to hold the aerial, this is done because the machine is carbon and I always make sure there is no aerial touching any part of the heli.
Jaemen1 3 years ago
I know you probably know this, but if you are flying to the ESC low voltage cut off you are shortening the life of your packs. Keep Flying!
GrizzlyAdams72 4 years ago
Thanks for the advise but no, the sound you herd is comming from my Timer on the TX !
Craig.
Jaemen1 4 years ago