Maruzen Type 96 Disassembly and PDI Hop-Up AssemblyPart2
Loading...
Link to this comment:
Top Comments
All Comments (50)
-
you can get those 2 O-rings in the hop-up in about 2 minutes with some clever handwork with a pair of tweezers and a pin with one of those plastic balls on the end.
-
Does anyone know what size the screws that adjust the hopup are? I know there is a repair kit, but I only need one of the screws so spending ten bucks for a screw is a little wasteful.
-
Whatsup with the tux man
-
and sllliiddee it in..... just right
-
do you have to buy a bucking for the PDI hop up...because i bought the whole hop up but not a new bucking, thought it came with one. can anyone verfiy if it comes with one or now?
-
Hey, I am having a problem with getting the inner barrel of my utg l96 out. I've tried pushing it with my thumb, using a screwdriver to push it, lots of force, etc. I even tried pushing a long rod down between the barrel and the inner barrel to push the foam rings, but it feels like I am going right through them! Any help on this would be greatly appreciated.
-
I got my two internal O-rings in the hop up in about 15 minute i think i got lucky =)
-
does this model of pdi hop up fit in a well l96? there is no set well pdi on x fire . org
-
Would I be able to buy a Madbull Ver. 2 6.03 precision inner barrel for UTG MK96 and a PDI hop up for type 96 and have them work together? Or does a PDI hop up chamber require a certain 70 dollar tight bore barrel instead?... I would just rather pay 35 dollars for a barrel because then its like you are paying 70 dollars for a piece of metal with a hole in it... Anyways, please help. BTW I have the UTG MK96 not the Maruzen but that has nothing to do with my question.
2:12
Why Not to Use an AEG as Your Sniper's Rifleby BakaTheCow15,586 views- 0:39
MAURUZEN TYPE 96 HIGHLY UPGRADEDby speedmonkey41115,823 views
- 0:19
Girl in a Bikini Shooting Suppressed Sub Machine Gun M11/9by MSPALTEN2,824,013 views
- 2:32
Madbull barrel in L96by p90m92f8,226 views
- 3:19
300ft airsoft sniper rifle shot with Maruzen Type 96by rabid762106,700 views
- 2:52
Well L96 Fully Upgraded 500fps With .43 Madbullsby Airsofterselite39,333 views
- 6:33
Maruzen Type 96 Review Part 1by BakaTheCow23,441 views
- 2:49
The scopecam sniper! Type L96by MikeE381539,911 views
- 7:29
Equipo de Reaccion Tactica - PDI (2)by falconwiki54,437 views
- 10:08
Mauser SR - Trigger Disassembly - Reassembly {Type 96 (L96)}by 808Kameleon12,112 views
- 7:16
UTG L96 Cylinder upgradesby kholt10812,184 views
- 7:18
UTG L96 Inner Barrel Assemblyby kholt1086,310 views
- 7:00
C96 disassembly and reassemblyby MosinDragunov189124,900 views
- 5:55
UTG L96 Disassembly Video Part 1by CullenBond2225,591 views
- 3:29
Maruzen Type 96 Reviewby BakaTheCow15,096 views
- 8:20
Part 2: Nokia N96 Disassembly and replace Flex / N96 Rasklapanje i zamjena flex'aby recisvakom47,927 views
- 4:04
Well L96 custom 520FPSby LeJAB6853,000 views
- 5:39
L96 cocking indicator fixby p90m92f10,709 views
- 4:33
How to upgrade your Airsoft gun AEG (Part 1)by DTopper4855,044 views
- 8:51
DIY: UTG L96 Hop Up and Barrel Disassembly and Reassembly -ASTKilo23-by ASTKilo238,991 views
no the maruzen uses better material and it shows when you run outta bbs
eddywangchang 3 years ago 5
kangi not that i can spell that (a form or Japanese writing) is the same in both Japanese and Chinese apart from a few slight differences
afroniner11dy12 3 years ago 2