20090115 Blade 400 Flips and First TicToc Attempts
Loading...
Loading...
3:15
blade 400 with upgrades stall turns & tic toc attemptsby allcalifornia3,575 views- 2:30
20090115 Blade 400 Flips and First TicToc Attempts (Not zoomed in)by odam2k130 views
- 2:28
Blade 400 TREE CRASH!! Stationary Flips/Rolls and Basic 3d Flyingby DijanRusta849 views
- 5:42
20090120 Indoor Orientation Blade 400by odam2k335 views
- 1:05
Eflite Blade 400 "Wesley"by tahanks172,482 views
- 4:39
Blade 400 Flips and Crashby sd01,193 views
- 4:38
Blade400 fun flyin!!!!by rcfreak69340 views
- 2:55
E-flite Blade 400by chiefredbeard23,101 views
- 3:14
Blade 400 Budget tips updateby imusbbored76587 views
- 1:41
E-flite Blade 400 RTFby unclebobscom378 views
- 2:15
20090114 Very Coldby odam2k211 views
- 5:52
20090113 Indoor Blade 400by odam2k317 views
- 0:42
20090112 Blade 400 Lift Offby odam2k200 views
- 4:31
Eflite Blade 400 - Loops, Rolls, and near crashby Siege221,805 views
- 3:16
My First Blade 400 Crashby MaXThReAT605 views
- 8:27
19 Jan 09 Blade 400 First Forward Flightby renec587222 views
- 0:23
Me plowin Plowing 2by dsj2212629 views
- 2:54
eflite blade 400by Crazycr35131 views
- 1:52
Blade 400 - Servo Lockup mid flight with recovery!by mikepmurf22,619 views
- 7:16
HOVERING MY BLADE 400by lampropilis219 views
I'm not sure what was in it at the time, but it is upgraded... It probably had a 401 gyro, 9257 tail servo, and hs65mg cyclic servos on it in he video... Currently I have two Blade 400's, with one with DS285 cyclic, 3400G tail servo, G401B gyro, and the other has HS5065MG cyclic, 9257 tail, G401B gytro, and both run Sonix 3500Kv motors with 13T pinions, and Copter-X CNC head and tails...
odam2k 2 years ago
is your blade stock or have you upgraded it?
cody11s 2 years ago
Thanks for the comments...
odam2k 3 years ago
great job, keep up the practice and good luck keeping it in the air! you're braver than i am.
pipskip5 3 years ago