Clothes Iron Surface Mount Desoldering / Bügeleisen auslöten
Loading...
Link to this comment:
Uploader Comments (thomaspfeiferDotNet)
Top Comments
-
great way to salvage components.
11 months ago 4
All Comments (42)
-
Saubär! Prima Idee!!
-
I know what flux means.... But apart from its name, it's grease... It helps the tin flow generally, soldering or desordering. And believe me it's particularly useful went you work with a suck pump or try to clean component pins...
-
@TrickyNekro flux is the latin word for flow, so therefore it is so it cleans and helps the solder flow onto it. Flux is of no importance if you are taking the solder off (desoldering)
-
hi geht es auch mit einem anderm Bügeleisen auch .Wenn ja ein bügeleisen mit mit keramik ? bitte eine schnell antwort !!!!!!!
-
@unrewritable One way is to use a heat gun. Look up "how to hot air reflow components" on YouTube and see how it's done.
-
subscribd!
-
Hi how can I desolder and solder an xbox 360 GPU without expensive equipment?
-
Neat idea!
-
How dos the plastic not melt?
- 1:40HowTo: Drag Soldering Demoby CuriousInventor54,402 views
Featured Video
- 3:17Broken Graphic Card?? BAKE IT!!!by MaEtUgR35,889 views
- 1:33Desolder SMD without special toolsby MrKobalts57,553 views
- 2:39SMD löten lernen (0805+0603)by eehajo19,873 views
- 0:31Magnetic Field of a Coil of Wireby JeffRegester265,332 views
- 0:14Richtig lötenby tippscout8,237 views
- 2:23How To Repair Laptop Hardisk Videoby nhatminh120944,962 views
- 4:32Professional Hand Soldering (Basic to Advance) ...by jkgamm041320,642 views
- 12:35Fix your 8800gtx Graphics Card (STEP by STEP) b...by brunothebarb47,104 views
- 5:49Desoldering an SMD chipby rkruetzfeldt18,719 views
- 4:55Microchips Tuning How to Desolder and Solder a...by MicrochipsTuning26,965 views
- 0:39Lead-Free BGA reflow IR550Aby BPELtd13,129 views
- 6:40Kurzes Löt Tutorialby PoelisTechnik32,420 views
- 3:30SMD Removal using a Chip Quik kitby kore46461,465 views
- 1:31Scara Soldering Robotby hotao8816,173 views
This is very good, I need to remove a surface mount chip for a hard drive pcb to another at what temp was your iron set at? and did this cause any damage to pcb or pcb tracks?
jstnlmb2008 4 years ago 4
The temperature was set to maximum. I have succesfully desoldered an Ethernet-MAC and some Atmel-Controllers without any damage. There was no noticeable change on the pcb.
However, i think it is a good idea to make some tries with an old pcb first.
See link in description for some additional pictures.
thomaspfeiferDotNet 4 years ago
yes, but do the components survive?
Fentanyl3 4 years ago
the components are soldered to the pcb with similar temperatures. Why not?
thomaspfeiferDotNet 4 years ago