KRC 210x 2001 5.9L Dodge Ram SCT tuned!!

KRC Performance 210x Cam, 2.02 EQ heads with LA "thin" head gaskets, 52mm TB with cut and ported intake, SCT tuned by Hemifever, stainless steel headers.

Category:

Autos & Vehicles

Tags:

• VTS
• 02

[1trucklover]

They are the clearwater heads, but they were not considered the Monster heads. They do have the larger springs and 2.02 valves though. I'm not sure what all the "Monster" heads includes. Make sure you check the valve seats before installing the heads, mine were wrong and I had to get them reworked...

That's a huge cam you are using!! Mine is as large as I would go in a quad cab 4x4 due to bottom end power loss. I regeared to 4.56 also and that brought everything together in my combo.

[RamThisDTO]

Wow sounds good, I didnt know the 210X had that healthy of a lump in the idle to it. I have a 210X cam in the engine I bought from a guy that was freshly built but done wrong and have it in the machine shop now. Excited to hear it loping away. I also have a 360 with the 224X cam, its in my vids. Its also in the machine shop lol.

[1trucklover]

@RamThisDTO It sounds a lot better now that I have all the bugs worked out of it and new exhaust. I hope you are running decent gears with this cam. The 3.55 do not do well; I changed mine to 4.56 and now I got some power!! Good luck with both your builds!!

[DLF61]

What valves and valve springs are u using I'm gettin a 210/220 @.50 lift cam for my truck and I can't figure out what valves and springs to use

[1trucklover]

I am running the .600 springs

[1trucklover]

@DLF61 I am also running the 2.02 valves

[flatlandkhe]

Are those Clearwater's Monster EQ Heads? I just bought mine with 2.02 valves and a Compcam with a custom grind of 218/223 @ .050 and .570/.540 lift along with new lifters, rods, and roller rockers. I also have HughesEngines FI Airgap Intake Mani and 3" LT Headers with an SCT Tune and 4.56 gearing with a Detroit True Track!! cant wait I get them installed next week!!

[1trucklover]

@jduckworth18 I have about $3500 in the engine, but that was a complete rebuild. The cam and programmer by theirself would run about $700-800 and thats not including installation. It's pretty expensive!!

[jduckworth18]

@1trucklover if you don't mind me asking, how much did it cost roughly to do all of this?

[amermuscle]

i love my sct tuner from sean ! ! how hard is it to do heads i have 1.7 rollor rocker? check out my vids