The Patrick Hosey Workshop: Farmhouse Table

http://www.ana-white.com presents: A farmhouse table crafted by woodworker Patrick Hosey.

New Farmhouse TV Stand Video: http://www.youtube.com/watch?v=H4NNnU...

Music and Woodworking: Patrick Hosey
Filmed & Edited: Gabriel Alan Gallant.

[Music Video] Dancing In The Dark by Patrick Hosey:
http://www.youtube.com/watch?v=6aW7mi...

*Cut List Plans: [http://ana-white.com/2012/05/plans/tu...]

Table
4 1x10x8's glued or pocket screwed together and then cut 6 1/2 ft long
2 1x 4 x8's long aprons are 66 inches and short aprons are 24 12 inches
that should give you a 2 inch over hang on either side or at least close
1 1x3x6 cut for the middle supports

Benches
2 1x12x6's cut 64 inches long
4 1x4x6's cut 58 1/2 inches long
bench legs are 1x12x6's cut 16 inches long

The middle bench legs have a 3 1/5 x 3/4 inch notch cut out at the top corners to fit the aprons.

Table painted with a yellow spray paint and a brown glaze.

• Category

  Howto & Style

[R McClellan]

Love this! How can I make this table sturdy if I only have a kreg?

[Patrick Hosey]

The table will be somewhat sturdy with just the Kreg but it really does need extra support. If you can grab a loose tenon system that would be great because you can add that to the pocket holes. If not at least use angled supports for extra strength.

[thebeast1673]

Hi. Isn't it funny how the questions keep coming?  How do you like the Beadlock joinery system?

[Patrick Hosey]

The Beadlock is awesome except I wish I had the bigger one. I liked though how You can combine pocket holes with loose tenon joinery if you use the smaller one. So far so good I'd say.

[Nick Wright]

Did you plane and joint the table top boards before assembling them? Also, what was the purpose of the stain and paint thinner mix as the finish. What are directions should i follow if I want a similar finish? Lastly, are those all soft pine boards or did you choose a harder wood? Great Video and Table! Extremely Talented!!!

[Patrick Hosey]

Yes I jointed them with a router table back before I had my jointer. The paint thinner went in to the clear coat and I cringe every time I see that part because I put way too much in there. It's all white pine from Home Depot and finishing isn't really my strong point so I can't really tell you how to do it. These videos are moreso motivating and artistic but not howto stuff. If you learn something then that's always a plus.

[heysalsaguy]

Thanks for the inspiring video. Did you have to plane the boards you got from home depot to get them flat? Most of the boards I see there are pretty warped.

also, how did you join the edges of the board? was it only glue? No dowels? Did I miss something?

[Jason Johnson]

Don't Die Cindy.

[dubstyleenation]

Really clean work style. It's the way I like working too. Would love a tool list, I saw a kreg, but didn't recognize any of the other handy doohickeys.

[jeSuperfly]

Excellent videography! I too enjoy using my Beadlock and Kreg tools! Please post more vids!

[Ryan Gonzales]

I'm going to try the bench project then the table when I get all the material. Very nice how it all came together. Awesome!