Detailed how to Install an AMD CPU and Thermal Grease
Loading...
Uploader Comments (Jonedcc)
All Comments (17)
-
+10
-
So some videos say just put a dot and then put the heat sink on and let that do the spreading. Which method is more effective?
-
What if there's gaps in between the underside of the cpu cooler? Would an even spread lead to gaps?
-
I agree with spreading the compound with the spoon and leaving the edges uncovered.
-
I like touching myself with a plastic spoon.
-
latex gloves..
-
@Jonedcc small x in the middle... Don't spread
-
If you're using a high quality heatsink cooler there is actually no need to spread out the thermal paste. Just put a pea size on the processor and put the cooler on top of the processor and move the cooler a little to the left and right and screw it down. it will spread itself out with good aftermarket coolers.
-
I like these new cpu fans
13:37
Detailed how to Install the Cooler Master Hyper N520 Heat Sink and Fanby Jonedcc18,710 views- 2:10
Installing a CPUby ChinquapinTech20,827 views
- 1:32
How to install AMD AM2, AM2+, AM3 and AM3+ CPU + Cooler!by GuideToUsing114,484 views
- 3:06
Proper way to apply thermal paste to a gpuby stoneyyay5,229 views
- 1:01
Beware of applying too much Thermal Paste!by XenomexTutorials25,306 views
- 0:16
Overheating Athlon 64 3000+by audiotranceable91,890 views
- 1:41
How To : Apply Thermal Compound (My Style)by scwebdevelopers2,446 views
- 1:02
How to Apply the Correct Amount Thermal Paste to your Xbox 360!by DJFORTYALLTHAT36,441 views
- 6:42
How to Install New Thermal Pasteby TheGeekDistrict46,758 views
- 0:24
RAM overclocking failureby Afrotechmods689,886 views
- 5:32
How to install CPU, heatsink and thermal pasteby UniquePcBuilder10,272 views
- 5:20
#55: Cooler Master Hyper TX3 EVO CPU cooler Review (CCReviews)by CCReviews9,503 views
- 9:47
Core i7 950 @ 3.8GHzby VickyBjorn79,017 views
- 2:07
Apply Thermal Paste & Reseat CPU Heatsinkby digitalstormpc11,555 views
- 3:13
Gigabyte Radeon HD6850 OC 1GB DDR5 256-bit Unboxingby PaltinCostin4,420 views
- 2:10
My main computer - overheating problem solvedby acecono3,401 views
- 6:41
Rainmeter Skin:Installation and Use Tutorialby raj217505,222 views
- 6:30
Cooler Master N520 HDby omarberrio19,715 views
- 1:14
how to enable crossfire in xfireby Superman2012101,800 views
Dropping a pea size can lead to uneven spread. In my tutorial I explain a Very thin even layer does the trick. My temps are below the sensor limit (32) at idle.
Jonedcc 3 months ago
more detailed videos pls psl :)
SaifYazeed 4 months ago
@SaifYazeed
I would, but everything I video is something I purchase; I wouldn't mind getting sponsored or them sending me products to review!
Jonedcc 4 months ago