SMT SMD Soldering In Toaster Oven
Loading...
Loading...
3:51
DIY Toaster Reflow Solderingby undergroundengineer5,586 views- 2:06
Reflow Controller, Soldering with a toasterby CafeLogic1,582 views
- 5:55
Reflow Toaster Oven having an Infrared Temperature Sensorby rippotan843 views
- 1:07
Reflow solder extreme close up (solder paste, hot air gun)by smbakeryt9,749 views
- 9:03
Reflow oven.MOVby kitatit2,581 views
- 5:36
Toaster oven reflowby hpux7356,293 views
- 9:44
A toaster oven converted to a solder reflow oven.by mrazekkarel4,368 views
- 3:21
How we make Cree Leds on Metal Core PCB in High Volumeby CutterElectronics818 views
- 1:00
Reflow Solderingby MichaelCiuffo4,470 views
- 0:38
Controller SMT oven for reflow solderingby ricolk931,217 views
- 0:27
Industrial Hot Plates by STI Systems and Technology International, Inc.by stiusainc485 views
- 3:27
Oven solderingby zolax575 views
- 2:56
SMD components hot air solderingby ChipDipvideo3,485 views
- 1:54
Reflowing the GOODFET31by PhirePhly2007644 views
- 0:59
DIY reflow toaster (part II)by xantus28,423 views
- 7:19
Reflowing BGAs with the techFX reflow controllerby TheSiliconHorizon331,856 views
- 1:31
Parallax Propeller Countersby tonysofla285 views
- 0:28
Prototype User Interface For Reflow Ovenby TheRazordog777 views
- 2:39
Video Card Repair Oven Baking Technique to Repair Solder Guide Linus Tech Tipsby LinusTechTips80,802 views
use pin hearders that are Liquid Crystal Polymer (LCP), High Temperature
(and with short tail pins)
Mouser Part #: 649-68000-436HLF
tonysofla 11 months ago
Very nice! I bought a toaster oven a while back to try this, but never got a chance to do so...
This won't melt the plastic of headers/sockets, will it?
TheBlackLungDisease 11 months ago
Look at 0:50 upper left to see 0805 resistors settling in nice.
tonysofla 11 months ago
Final Stage, press Off-Button 2-3 seconds after last solder melted.
As going over 260c for more than 10 seconds is not good.
Do NOT use if for food later due to lead build-up.
You can buy it here orangeonions dot_com
tonysofla 11 months ago