Radio Flash Trigger (PT-04TM) Test
Uploader Comments (JLPhotoProduct)
All Comments (14)
-
I like how you say your company makes sure these are in working condition. Now i would'n't need anything extra to trigger my nikon flash right? and do you sell for around the same price as amazon does?
-
Our custom 2.4Ghz flash trigger :)
-
If i buy these could they be used by a Nikon D2H and 2 vivitar 2000's?
-
is this the version 2?
-
same thing
-
Will this work with sb-20 & sb-22s?
-
I saw this on Ebay. One question, there were many that were named Jianisi and some were named something else. They are all the same right?
-
can i mount this on my canon 400d.? dos it work?
-
i got two of these flash triggers and when i use one of them it only works when its beside the other one, any ideas y this is happening
-
for studio lighting, it has not been tested before. However, theoretically it should work. You will need additional PC Sync cord that is compatible to connect the studio lighting and the PT04 (or CTR301)
Minolta FS1100 is meant mainly for the Trigger of PT04 (if you opt for CTR301, you do not need FS1100).
i can use this on my a200 right?
punkdude1668 2 years ago
Yes absolutely.
However you will need the following item,
- Minolta FS1100
- or replica of it (JL Photo is selling this)
If you need to use Sony to trigger a Sony hotshoe flash, you will need extra items shown below,.
- Minolta FS1200
- or replica of it (JL Photo is selling this)
- A little modification on the receivers (with extra cost)
JLPhotoProduct 2 years ago
Alternatively for Sony DSLR, you may opt for CTR-301 (For Sony), it can mount directly to Sony DSLR hotshoe. However if you wish to trigger a Sony hotshoe flash, you will still require those items mentioned above.
Hope it helps. =)
JLPhotoProduct 2 years ago
mine is not reliable at all..when you click on the transmitter, the receiver receive all right, but when hooked up onto the camera's hot shoe, then comes trouble. it doesnt sync well enough.
ijadattouyube 2 years ago
If you wish to try units sold by us. You may test upon dealing. =)
JLPhotoProduct 2 years ago
wish mine would fire like that! one of my recievers only fires with the back uncovered and really close to the transmiter! i dont have any problems with the other reciever tho
xpurexheartx 2 years ago
Hi, I am not sure what goes wrong with your units but for units sold by JL Photo, we will make sure ALL UNITS are in working condition.
On top of that, all units sold comes with 1 week one-to-one exchange warranty. =)
JLPhotoProduct 2 years ago