BMW Dynamic Performance Control Technology Guide

Dynamic Performance Control switches power between the left and right rear wheels to stabilise the vehicle within milliseconds and help increase traction and lateral acceleration. Handling is lighter and more precise during normal as well as difficult driving conditions.

How Dynamic Performance Control works can best be described in canoeing terms: if you want to turn right when canoeing in the main current, you can brake using the paddle on the right side of the canoe. This is how most common electronic stability programs work. Alternatively, you could use the paddle powerfully on the left side of the canoe in order to have more control in progressing forwards and turning right. This is the principle behind Dynamic Performance Control.
It links the standard rear differential with a mechanical planetary gear set and an electronically controlled multi-plate clutch for each rear wheel. Its mechatronical system combines informatics, electronics and mechanics to process complex data such as the yaw rate, wheel speeds, steering angle and engine torque so that it can react immediately: when required, the system ensures that drive power distribution to the rear wheels can be freely varied and increased on either side as needed. The power distribution can also be displayed on the onboard computer.
Dynamic Performance Control increases directional stability when accelerating out of bends and provides the driver with extra support when dealing with difficult driving conditions. Before under- or oversteer can take place, lateral guided force is used to keep the vehicle on track. Precise steering significantly increases driving comfort and safety.
Dynamic Performance Control is also effective when the vehicle is coasting - when the driver removes their foot from the accelerator - or when they have pressed the clutch pedal. If the rear wheels are on different types of surfaces, Dynamic Performance Control improves traction by supplying more drive power to the wheel with more grip. A wheel torque difference of up to 1,800 Nm can be actively created between the left and right rear wheels. This increases driving stability and allows for much faster acceleration.
As a logical progression to the xDrive all-wheel drive system, Dynamic Performance Control can be matched to all drive concepts and engines. Whereas xDrive variably controls the power distribution between the front and rear axles, Dynamic Performance Control intelligently distributes power between the two rear wheels. This results in precise handling whatever the driving conditions.

Category:

Autos & Vehicles

Tags:

• BMW
• DPC
• Dynamic
• Performance
• Control
• Technology
• Guide
• X6
• Drive
• reardrive
• xDrive
• 4wd
• concept
• system
• power
• distribution

[levitron80]

when the car turns the inner side wheels rotates slower than the outer ones ... prevent's skidding ...

[LienderNick]

It brakes the inner side wheels to achieve the same kind result before,that makes fuel consumption.But now,this system can make the same result without any fuel consumption!

[hyundaixl]

Well done BMW! My Nissan had this more than 10 years ago!! :P

[lmerfu]

The rear-wheel system looks so complicated ...

[xstockholmx]

I Used Esp golf+Used DSC in Bmw 530

I fell more better with ESP,,Hope I be Wrong,

[queensgod]

think the narrator was talking kinda quiet, didn't understand the concept neither

[willderwallo]

Great System!

Works very well in a X6.

Allowes a very sportive handling with this SAV.

The car gets best traction in every situation.

Greetz :-)

[Wolfox360]

That thing must be VERY HEAVY O.O

[bbikhodi]

i didn't understand !