Inferno GT Aston Martin
Loading...
19,551
Loading...
Uploader Comments (EVAD2192)
see all
All Comments (35)
-
CORRECT!
A GOOD ARGUEMENT WELL SAID!
-
whats the scale for the car ? 1/8 1/6
-
its uses some speacil kind ov fuel, mostly 25% growl fuel
-
ma che ce fai il rally co sta macchina è distrutta!!!
-
wtf happend to your car
-
Actualy up from 25%nitro u have to modifie the space from head to piston top with the copper washers! Other than that any engine runs 30% or more! In my opinion run 25% what ever brand u prefer (watch for runing temperature nitro engine like more than 80cº and less than 120cº).
Good luck for the beginners and dont go mad at your engines u just need to learn the tuning part of them! =)
Loading...
I am beginner, and i really want to know, what kind a fuel does that use?
superhippiexxx 3 years ago
It depends on what motor you have in the car. Regardless of what the instructions say for RTR vehicles you can run up to 30% nitro fuel. Tornado or Maxy's is what I usually use but any fuel that is between 20% - 30% fuel is best. Also don't by fuel with any type of colors in it because it shortens the life of the motor.
EVAD2192 3 years ago
wrong!
How does coloured fuel runin the engine?
what proof have you to say that?
i rin byron race 20% and it runs way better than odonell or tornado, whenever i use it it runs much cooler and richer, so i can lean it more and therfore giving it more laps per tank!
I recomend Byron race 20% to anyone, wether they are running for road or on road, it runs vey good, and runs cooler so it keeps my engine strong.
popcornreviews 2 years ago
I never said byrons was a bad fuel. I'm talking about fuels that have hevy tints to them. These colors actually rob you of power and are sometimes visible inside the piston sleave when taken apart. I've seen 3 maybe four motors with this issue. But i have used byrons before and really can't complain but i prefer fuels between 25% and 30%.
EVAD2192 2 years ago
Ok, i would youse 25% but with my engine, the manuel says i have to lower the commpression ratio with a thicker headgasket, and im really not botherd that much so i stick with 20%, also i Find the lower the persentage the eaiser it is to tune, but 10 or 16% is just horrible, it gives you NO power at all!
popcornreviews 2 years ago
Yea, the motors I used said anything 30% and higher i had to raise the head. One motor I actually did raise te head and used 30% but I really didn't notice a big gain in power. Just made it a hair more difficult to tune.
EVAD2192 2 years ago