Servo Glitches
Loading...
Uploader Comments (SeaComms)
All Comments (17)
-
@rcplaneguy yes that is true i just sent my back to horizon hobby lets see what that do
i use it too fly 2 of my heli a trex 600 and my blade 400
-
maby you need a servo with more pulling and pushing power
-
wat causes that problem?
-
Just get TREX450 with good hitec servos, problem solved.
-
Yeah the DX6i transmitter is under recall for bad pots. Guess you had one of the defective ones.
-
That happened to me once... I had to adjust the servo unhook everything and realign the servo horns.
So what was the problem?
-
It's not the differences in Mhz/Ghz that makes 2.4Ghz safe. You know that 2.4Ghz is exactly 2400Mhz?! Its the decoding system that makes it safe. DSM for JR/Spektrum and FASST for futuba. And you can get interference and lockouts. Cell phones and most computer networks work on the 2.4ghz area and if you happen to fly near or in a hotspot, then there is a risk of swamping the front end of you RX. The same goes for FPV cams that sends on the 2.4ghz band. Google 2.4ghz swamping.
-
im only 14, i do my research when i need to, i dnt even no wot RF is. if you say the full word, i will understand, but 2.4Ghz was created for no-interfierence, even on the 'blade 400 talk-through' the hobby shops who purchase it say its non-interfearable. Unless you'd rather go Mhz and risk losing connection, ive seen it happen to nitros and theres nothing a pilot can do except watch his $2000 heli get smashed into pieces.
1:57
Blade 400 Stuffed Aileron Servoby SeaComms13,115 views- 1:09
SERVO PROMBLEMS AND HOW TO FIX THEMby TheExceed16,231 views
- 2:33
Blade 400 Modification Upgradesby tsantos012816,551 views
- 0:39
gasser glitchesby gluino17,375 views
- 1:18
Copter X Gy401 tail glitchby winggee3,937 views
- 0:37
Axe cp that glitches!by fishravioli7,012 views
- 9:49
DX6i Spektrumby johnky77717,224 views
- 5:28
Blade 400 3D Basic flight theory Iby sokal1154,293 views
- 6:34
Twister Storm 3D Servo Jitterby nbusetti2,189 views
- 0:36
Servo Motor Control - Multiple Servosby PyroElectroDotCom92,142 views
- 4:12
Blade 400 Tail Rotor DS285 servo set up w stock gyro 10 20 09by Senegal013,016 views
- 1:46
Alpha 40by herbertettore17,081 views
- 7:00
How to do RC Heli Blade Trackingby alishanmao94,780 views
- 2:31
Failed Servo Experimentby shazbot9962,514 views
- 7:55
Spektrum RC Model Rocket Launcher Part 2 of 2by DelSolSea2,352 views
- 0:44
Heli Servo problemby CodeB4US10507 views
- 9:02
Blade 400 3d Head Setup Part 2by sokal1151,333 views
- 2:23
Blade CP PRO DX6i Problemsby erwin15erwin1,286 views
- 1:56
EB4 S3 Hump Pack Battery problemsby sonnyr20065,131 views
- 3:26
E-flite Enticement maiden flight F3P rc airplaneby FlyingPencill5,839 views
I tried different servos, different receiver and a different speed controller. Not until the TX was replaced did the fault dissapear. Have been using the replacement TX for nearly a year and no glitches since in 5 different models (including the Heli, which is a Blade 400).
Cheers, Dave.
SeaComms 3 years ago
Sorry all, wasnt getting messages to say I had comments!
OK, the problem ended up being the TX. If you moved the sticks to particular locations as described in the video, the glitches occured. If you changed the expo or the dual rates the position of the sticks to cause the glitch changed as well, indicating it was not a noisey pot.
SeaComms 3 years ago