Manco dingo 285 5.5HP ohv go cart
Loading...
23,395
Uploader Comments (thegenrl)
see all
All Comments (39)
-
I love the invisible roll cage
-
@Mijaycapri79 if your kill switch broke just tie the two wires together and that will hot wire it to run and when you go to shut it off just either un tie the wires or unplug the spark plug wire that will shut it down
-
what size sprockets r u running on the engine and axle
-
same cart here man the tires that come with it suck balls the front ones the back last for a while
-
are you selling that and how much and i am a girl
-
mine was fully red.. but im only after painting it half black... mine needs 2 more tires :L <3 winter
-
@thegenrl And by the way... I have the pathwinder if that helps.
Loading...
PLEASE RESPOND TO THIS!!! PLEASE I NEED YOUR HELP!!! I have that same engine on mine.... the only problem is My Kill switch Broke on it. I've been looking at alot of videos and I can't find it... What kind of switch did you use(SPST? SPDT? DPST?)? How many Prongs was it? And did you wire it to the Negative side (-) of the switch or the positive side (+) ??? Please I need your help... I have to Run the fuel out of my engine to cut it off! Please help me!!!
Mijaycapri79 1 year ago
@Mijaycapri79 whoa easy there capri, it's not too hard we'll get through this.
you can use any, but all you need is a SPST. connect the middle lead to ground and the other lead to the ignition. when you open the two, the engine will run. when you close the two, the engine will not run.
thegenrl 1 year ago
@thegenrl On mine, It doesn't have that red switch on the engine... It just have a One wire switch with a connecter by the carb and my switch is the switch that takes the one wire and screws it into the switch. I took the switch plate off and all it has is a bearing ball which turns the switch on and off... its a weird one way switch. It doesnt have two wires only one. Any help?
Mijaycapri79 1 year ago
@Mijaycapri79 hi again. the switch is probably self-grounded, meaning one leg is already connected to ground (go cart frame). the other leg is connected to the primary of the coil, which is probably the only wire coming out of the engine. this way when you close the contacts of the switch (switch the motor off) the primary of the coil grounds and stops the spark from happening.
thegenrl 1 year ago