One wrong way to unload a bridgeport clone from the trailer
Loading...
Loading...
23,041
Loading...
0:48
Lost my job todayby martinlaukeland552460,610 views- 3:13
making a hemisphere on the millby teamphoenicia2,138 views
- 0:46
Oopsby Ditch3631,684,749 views
- 1:42
A milling machine trick you have to see!by roadracenut209,428 views
- 2:39
Lathe tricksby gertsafari140,848 views
- 1:27
Moving a Milling Machine and a Engine Latheby braindrainwiki5,546 views
- 2:09
Bare bryster og bandeord Politiet fjerner skov-aktivisterby indiamaluka958,891 views
- 1:00
Loading garden tractor the wrong wayby Sgtgym53,756 views
- 0:40
Do not try this at the car washby asjaffa335,984 views
- 0:33
True 5 axis cut, awsome part too!!by jbcourt3117,501 views
- 3:08
How to make perfect sphere on a latheby sasafed197013,829 views
- 2:22
How to Get a Smooth Finish on a Metal Lathe - Kevin Caronby kevincaron44,902 views
- 1:59
How to resurface your cylinder head without a 16 ton milling machine.by BuBliEz452,965 views
- 18:04
How to run a latheby nder1234515,006 views
- 3:39
long load left in to tight drive wayby djHighEnd26,716 views
- 1:19
bridgeport milling machineby 973beatie27,209 views
- 2:08
heavy millingby bizdad20,850 views
- 2:33
Weil ich dich liebeby jayblue251010,863,669 views
- 0:47
SPLINE MILLING !!! FORGET GEAR CUTTING OR SPLINE CUTTINGby splinetechno12,351 views
When I unloaded mine from a trailer identical to this one, I chain the skid to the hitch on another truck, and with the trailer still attached to the first truck - pulled out from under the mill far enough to pick it up with a cherry picker. Then just pulled away, and moved it around with a pallet jack, like the other commenter.
tahwnikcufos 5 days ago
I rolled mine down a tilt trailer on a pallet jack with a come along. Then I just rolled it right in.
madinventor13 4 weeks ago
...glad to read catastrophe had not ensued...all i could see from the thumb-nail was it falling and cracking the motor housing and crane...yikes!...
SittingMooseShaman 1 month ago
pull the skid, not the machine...lol did it come off the trailer in one piece?
hdrjunkie 1 month ago
When I was 17, I helped move a 1ton drill press with a 60y/o metal worker and some others. I was told to stay well away and was helping pick up ropes or open and close things. The older guy still instinctively had his hand resting on the casting, to balance or catch it. Realistically, there's not a chance he'd have made any difference to it had it started to topple, it'd have flattened him. His younger son was there and had to tell him to let go of it himself. Everyone needs some help sometimes.
lexichronicle2 1 month ago
I'd have been most worried about it when it reached the edge, and had a pivot point to topple on.
I'm not disliking the video though. The title is 'wrong way' and the guy's undoubtedly uploaded it knowing people will complain, but hoping to demonstrate why it's not a great idea for others.
lexichronicle2 1 month ago
people get killed doing stupid stuff like this.
automan1223 1 month ago
@GnosisMan50 i used a simliar method for a hot tub with pvc ..worked great
dtp5150 1 month ago
better the car than him.....
In ref to the video, he ought to have placed a few 1" pipes underneath the mill and moved it that way without the car....
GnosisMan50 2 months ago
thats ok it just a clone.
HobbieZones 1 year ago