Beretta Nano - Disassembling the Slide

This is an informational video on how to disassemble the Beretta Nano slide assembly. I am, by no means, a pro at this. But, here you go. Hope this helps you out. Please forgive my left pinky and it's tendency to stick out. It locks up on me, due to an old injury. I'm not sipping tea. Hahhahahaha!

• Category

  Education

[Atticaz]

The turnaround time is usually 6-8 weeks. I just sent them the barrel and slide. $160 plus shipping and handling.

[Atticaz]

No. It's Robar NP3

[Atticaz]

@pugilist102: Got a video up for the chassis removal for the Nano.

[Atticaz]

Good idea. I will do that one next.

[Atticaz]

I sent it off to Robar Guns for the NP3 refinishing. It's more of a Satin finishing, But if you lightly polish it with a soft metal polish (I used Mothers Mag & Aluminum Polish), it'll come out pretty shiny.

[Atticaz]

I would definitely clean strip the slide after 500 rounds and clean it. I was at 600+ and it was pretty gross in there. I cleaned it before the video.

The Steve Bedair guide rods: They are heavier. But I really do not notice it. With the steel, you can be more assured that the front cap of the rod won't pop off on you. Now, this hasn't happened much, with the polymer ones. But it has; with this pistol and the PX4. It's mostly a visual upgrade.

[pistolpacking pastor]

Fantastic, just completed all the polishing and it took all the grit right out of the trigger pull...only addition is to use a flat faced punch tool to depress the striker spring, I used a tiny flat head screwdriver and it shaved some of the face off the striker plunger...

[heavyhitta52]

never seen the silver color combo on the nano. nice

[GiggityGuy1]

Thanks for the vid. Was having trouble with a soft strike. It was just gunked up. All good now.

[Jeremy Sikora]

Thanks for the info.

[Jeremy Sikora]

Thanks for the video. I'm looking to send my Nano to Robar. Did you just send them the barrel and slide? And how long was the turn around since it was not the whole gun? Thanks again.

[Ross8U]

good vid, thanks for the info. is your slide duracoat?