How to fix Dangerous Power G4 Bolt Stick
Loading...
1,311
Loading...
Uploader Comments (KWGPaintVeins)
see all
All Comments (34)
-
Awesome video. Best one yet
-
What kined of lube do u use
-
What cined of lube do u use
-
please respond. could i use sleek lube?
-
@paintballsomething this is so much better the mini has a crap trigger, and it's just too too small unless your a front player, the g4 is cheaper and a better gun, in all classes I would recommend it over the mini
-
thin lube on the bolt
-
Damn good video. I am going to try and put that to the test. Last week I had a crazy air leak then it lead to bolt stick. Prob bcuz of lack of air going thru the noid. Put some very thin lube on it and then it became even worst. Air was leaking in the breach. Any suggestions. Thx
-
can i use gun oil or does it have to be like a grease?
Loading...
Is hater sauce a good lube to put on the bolt?
JDMVi3tboi 3 weeks ago
@JDMVi3tboi Yes, hater sauce is a really nice grease to use. But if you get the G4 BRAND NEW, then use something much thinner until you've put about 2,000-3,500 rounds through it and broke the gun in. If you start off with hater sauce, you will get bolt stick sometimes. This is because of the bolt, not the grease. So use baby oil for about 2,000-3,500 shots and then use hater sauce to dominate the field!
KWGPaintVeins 3 weeks ago
@paintballsomething If you fix the bolt stick, this is a much nicer gun imo. If you are willing to spend more, get the Empire Axe.
KWGPaintVeins 1 month ago
@wildredninja yes, but don't replace bable oil for regular lubricant. It's mineral based so it will swell the o-rings too much if you use it like synthetic lube. It's what I reccomend using to prevent bolt stick at first, but then to move onto something synthetic and high quality like hater sauce or PE lube
KWGPaintVeins 1 month ago
@santosjohn19 your favorite grease or lube will work. Just something you trust.
KWGPaintVeins 1 month ago
JDMVi3tboi no, you won't need loctite at all. You need plumbers tape to seal the actual fitting to your asa and reg, but the fitting is designed to seal and hold onto macroline.
KWGPaintVeins 1 month ago