Fitting Fog Lights Ford Fiesta Mk6

Please could you help me with the procedure of fitting genuine front fogs to a mk6 ford fiesta LX 1242cc? On the lx model ther is a black plastic plate where would sit like on the other models, does this pop out? Also does the dashboard have to come out to fit the headlamp switch? Is this whole job pretty difficult? Any help would be gr8!! Ford quoted me £350 supplied and fitted
Update on fitting the replacment headlamp switch with the added front fog light part. Bought it from ebay for 17 quid, arrived nxt day had to take out my speedo cluster, no real problems just the surround clips out then therrs two screws at the top of the speedo near the windscreen, remove them then thers a plug on the underside unclip that. Now get your head in and you can see thers three screws holding the switch in postion you will only see one but if you put your hand in you will feel the others. take of the panel underneath the steering wheel, 5 or 6 screws and get your hand up and try unscrewing the three screws. Nightmare you will cut your hand doing this lol. However Id rather do this thatn take the dash out. I used the new switch to give me an idea wer the fixing holes would be. But it is possible and i have now done it and my old switch is on ebay now, email me and i could show you some photos
Update on fitting front fogs! On the LX model the front bumper is a two piece bumper, the postion where the fogs are to sit have matt black plastic plate ther, They do NOT pop out ther for you have either cut them out or buy the bottom half of the bumper with holes already init from ford £85. Or sell your whole bumper and get the single piece bumper like on the upper modles (the zetec, silver, flame, black) I dunno if cutting it out would work but if you mess it up then you cant really sell it. I got a new bumper from ebay £32 plus £10 p&p brand new amd primed and hopefully i sell my old one to cover the cost of the new one. Although you still have to get it painted, I have a friend who done my for £50. Now you will need 2 front fogs 2 plates that suround the fogs and also the center grill to be inserted into your new sprayed bumper. You will also have to buy a ford fiesta mk6 front fog light wire loom, £24.88 from ford Basically a cable with three plugs on it, two plug fit on two the H11 light bulbs and the other plug fits on to a plug jst resting on the back of the raditor. Ther is a black plastic protective cover, remove that then insert the plug, Now you have power to the front of the car, If Not the insert a fuse in the fuse board. Assemble everythin together and fit the bumper !

Photo Slideshow

Category:

Autos & Vehicles

Tags:

• Ford
• Fiesta
• Mk6
• Fog
• Lamps
• Lights

[TechnoVikinGi]

Good job, helped this video very much.