ASUS G73JH Hard Drive Replacement - Intel 160GB X-25M SSD
Uploader Comments (tmdennie)
Top Comments
-
NEVER REPLACE A COMPONENT IF THE UNIT STILL HAS AN ENERGY SOURCE
-
Where did you get the other harddrive cage/caddy thingy?
All Comments (134)
-
Question: I have ordered an SSD for my G73JH. So basically, if I want to transfer the OS from the stock (C:/) HDD to the SSD, I need to first install the SSD and then clone it over correct? Once cloned to the SSD, I make the new SSD the bootable one? (I think thats what you did?)
-
Very helpful. Thank you. This thing makes a drastic improvement to an already fast machine. The 120GB Intel is on sale at Best Buy for $159.
-
This is amazing ty
-
Don't wanna buy no more
-
Hey so, i was curious, i want to use my recovery discs for my asusg73jh for a factory install onto a 120gb SSD, is that possible? I've read somewhere that the drive has to be either equal or greater size and in FAT...
Am i only to get a equal/greater drive or install drivers manually? I'd rather do factory install.
-
@tmdennie What is the maximum hight for a hard drive for the g73, im lookin at a western digital raptor drive that is for laptops Height (maximum): 14.5mm
Width (maximum): 69.75mm
I know the width is fine from what I've seen they are 9.5mm height by default and I wanna make sure it would still fit. Thanks.
-
Thanks. I had 1 drive in with the caddy pointing the wrong way and I couldn't figure out why the screw holes didn't match. Your video cleared that up. It would be nice when you order a drive caddy from Asus if they supplied the screws as well. I had to go to 3 different computer shops to find the screws.
-
Is the asus a SATA 2 or 3?
-
What is the name of the screw that holds the ''bottom door''?
-
Great vid by the way so you cloned the hd over to the intel ssd, how did you do that
what kind of interface does the second hard drive need im upgrading mine
MrBigdify 11 months ago
@MrBigdify SATA
tmdennie 11 months ago
What is the brand of that screwdriver you are using? I've been looking for a good set for PC and Laptop Repair that are both very magnetic and made good so they don't strip out. Thankz.
ASHLEY031696 1 year ago
@ASHLEY031696 Hey Ashley, That screwdriver is a Craftsman P1, but the P0 and P2 are amazing to keep around for both smaller and bigger screws. They are great screwdrivers that seem to grab onto most screws I encounter on a daily basis. They're really sharp-tipped and work great!
tmdennie 1 year ago
HI TMDENNIE,
if i used the kingston SSDNOW 100, does it have the same size as the Intel SSD x-25m?
smooVe1234 1 year ago
@smooVe1234 The SSDNow should be the same thickness, but it has a chance of being a little thicker. Make sure you find out before ordering it. Other than thickness, all 2.5" laptop drives, whether they're SSD or rotational HDD's, are all the same size.
tmdennie 1 year ago