trex tail wag
Loading...
Loading...
0:54
T-Rex 450 Tail Vibration (hover test)by helihopeful904 views- 1:47
TREX tail wag / bounceby shizack20002,278 views
- 0:49
Trex 450 Sport withTail Vibration - GP750 hates itby TheBionicbone1,129 views
- 1:09
TAIL WAGby jsa20011,052 views
- 2:54
Trex 450 Tail shaking please any suggestions?by fedaks5,222 views
- 0:47
Play in the tail gear of the Align Trex 450 Proby Blueray4504,748 views
- 1:42
T-Rex 500 tail wag at first hoverby sirenp36,243 views
- 0:31
Tail Wag Problemby andycelica123906 views
- 3:12
Maiden Flight Align TREX-450 Pro with Gyro problemby breedj15,940 views
- 4:43
T-rex 450 Sport Build 7 of 7 Tail wag in test flight fixed.wmvby MrSpeedy0112,551 views
- 0:24
trex 250 tail problemby funflyaj4,114 views
- 0:27
Trex 450 with AP2000i Logitech 2100T 8% gainby charosenz1,264 views
- 0:50
Copter X tail wagby soneebee1,880 views
- 0:20
Align RCE-600 Gyro Tail wagby timmytronzzz1,603 views
- 0:56
Trex 450 v2 shake problem (need a solution)by Cracksoda467 views
- 7:26
Setup Align GP780 Gyro (PaRt1).aviby MaSt0RaS21,684 views
- 1:28
Trex 450sa, tail wag after piro problemby jayywhyy874 views
- 0:41
trex tail wagby LostThoughts81536 views
- 4:28
Trex 500 - tail problem solved.by opit3022,804 views
Just too low rotation in normal mode. In Idle it looks normal to me.
Happened to mine before I increase rotation in normal mode.
You must see your throttle curve.
SupRec 1 year ago
It llooks like you have an up and down movement also. Check to see that your tail blades and main blades are not to tight. If they are it will bounce..
daletheman3 2 years ago
At idel 1-2 it ok i gues, but you must have more speed on normal mode.
this is tail (bob) not wag is due to low rpm,
Up the throttle curve on normal mode an it wil be fine.
TommyStokke 3 years ago
If you tried adjusting the Gain on the gyro well my guess is you have a bind on the rod from the servo to the tail rotor.
It take very little friction to cause a wag.
Make shure the rod is very straight and has free movement.
PaulGrc 3 years ago