55 in a V-Mate I
Loading...
Loading...
3:32
Checkmate out on Lake Loramieby rebel937236 views- 2:06
Code geass OST Checkmateby RubyanDrake6,831 views
- 5:26
3D animation.. Checkmate!by jisanghoon7,341 views
- 1:37
New Checkmate motorby rebel93795 views
- 0:40
Checkmate cruizinby rebel93766 views
- 1:14
Checkmate V-Mate II 250 ProXS.m4vby 87XTStream102 views
- 0:15
Checkmate fly byby rebel93795 views
- 1:48
bajaby rebel937659 views
- 0:25
Checkmate vmate I with a 70by nburgart425079 views
- 9:39
POO SS MONTE CARLO CHECK MATE 1988by ActiveHoodRich15,340 views
- 11:28
CheckMate vs Gloat Vid 3by IICh3ckMateII1,284 views
- 1:10
1984 CHECKMATE ENCHANTER W/ MERCURY BLACK MAX 3.4LT 300HP V6by 2qwk2,452 views
- 0:28
Checkmate boatby megadavemcc1,883 views
- 7:00
checkmate v mate, racing boat, mercury dragby powercatboat4,325 views
- 4:14
Fast Checkmate.WMVby Mr1fastCheckmate515 views
- 2:46
Building a Baja Bugby rebel9373,851 views
- 3:19
LGYankees chEck maTe feat EIGHT TRACKby 244kouki12,216 views
- 0:54
Checkmate Boat 150 Mercury Outboardby parsonspoint7,630 views
- 10:02
Check Mate VS Digital - TT CAP 5/15 2009by NaomiHunter88836 views
- 3:25
Checkmate with Johnson 70hp outboard speed boatby haassman5,287 views
Well I uploaded a video of my boat with my dad driving. I don't think it was quite wide open but its running about 40 with the new prop
nburgart4250 1 year ago
@nburgart4250 Make sure you check the compression!! If it has compression on all cylinders and spark it should be ok. I have a 75hp that sounds GREAT but put it in the water its a dog! it is low on compression on 1 cylinder so it dont fire under load.
rebel937 1 year ago
@rebel937 they have the motor listed for 1200 on ebay and its local so im gonna try and check it out this weekend
nburgart4250 1 year ago
@nburgart4250 I got lucky with the 115 it been sitting since 94. I gave $600 for the whole boat. I put about another $100 in it and its good to go for now. It needs coils because they are old and cracked and were jumping spark but I used a little silicone over the cracks for a quick fix to get by till next year.
rebel937 1 year ago
@rebel937 yeah i found out about smart tabs and they cut down on chine walking really good so i might try the 140 if its in good shape
nburgart4250 1 year ago
@nburgart4250 on a 16 ft? yeah 140 might be a bit much but I have seen it done. Going out Saturday morning to do some tubing and skiing see how it does now that I backed down the RPMS
rebel937 1 year ago
@rebel937 as soon as that prop comes in im gonna get some videos of it up. I also found a 140 in really good shape but im thinking it might be to much for the boat
nburgart4250 1 year ago
@nburgart4250 Im going to stick with the 19 for now it works good for tubing and stuff. I dont need any faster untill I get the steering arm bushings replaced on the motor. I have the motor set about 1 1/2 inches above the pad and it gets a little hairy at higher speeds and chine walks like crazy with a little over 1/4 inch of play in the steering.
rebel937 1 year ago
I bet that thing will fly with a 21" or 23" prop. I got a 21 for my 70 until I can find a good deal on a 115.
nburgart4250 1 year ago
@nburgart4250 that is with the stock 13X19 prop but I was turning way too many RPM. With me in the boat alone I can hit 62 but the poor motor is screaming. I back it down to 5500RPM and can run 48 with 4 adults.
rebel937 1 year ago