Hydrogen Tap (New AAron's Cell N-16) 253
Loading...
21,339
Loading...
Uploader Comments (johnaarons)
see all
All Comments (31)
-
The "FOCUS" plates "NOW" use two 1/16" Nylon washer on each Nylon screw... giving you the 1/8th.
-
what do you space the plates with
-
thx dude
how much would u say it costs to make a cell
that would produce about 24V ? or multiple cells?
thx
-
This is an old video... the spacers are hand made 1/8 inch plastic.
John AArons
Loading...
can i use switch control to control the electric flow to the hydrogen tap ?(i mean high low)tq
whloo 3 years ago
Most cells (including mine) require a switch that will through at least 15 amps to 30 amps.. but you can do that... the problem is that (like I did once) you may forget to turn off the cell when the car is off..
John AArons
johnaarons 3 years ago
What kind of amp draw is there when a system using that many negative and positive plates create? And how thick are your plates? They dont look like they'd last too long, ast least not a year if you are pushing a lot of power. Just curious! =)
brown55061 3 years ago
In fact you are wrong... That unit is one of the most solid blocks out there...
John AArons
johnaarons 3 years ago
I saw the website. Is 430 SS better than the T-304, 312 etc? I know nothing about the contents of the metals. I was just thinking more neutral plates will lower the amps and reduce heat and corrosion. Sure its not as powerful but you would replace less plates in theory.
brown55061 3 years ago
This is an old video... there are over 356 videos out there and my new cell "FOCUS" does use "Neutral" (Blank) plates..
John AArons
johnaarons 3 years ago