JG M4A1
Loading...
Link to this comment:
Top Comments
All Comments (13)
-
if it wobbles you can go buy a new 15 dollar post off line and can use the same stock PLATE if you have that much + shipping and handiling there you go
-
take off the stock all the way take off the cap at the end and get a long screwdriver and just tighten it there is a screw that connects the stock and gun
-
get this gun, it is really good, after i tightened that it has not come loose again
-
you have to take the gun apart and theres a screw connecting the stalk to the gun. just tighten up that screw and put the gun back together and it will be fine
-
problem solved, thanks!
-
nice good thing somebody posted a video since im having the same problem right now have you fixed it yet??
-
both work fine i just use the .20g bbs cause they're cheaper. .25 are more recommended for snipers.
-
.20g bbs
3:14
JG M4A1 Reviewby wheatiesguy6448,845 views- 2:57
Jing Gong M4A1 overviewby slipknotjake11,791 views
- 2:49
Firing report of my JG M4a1by Digitalenzo22,549 views
- 5:04
My review of my JG M4a1 Carbine Part 1by Digitalenzo26,857 views
- 1:24
JG M4A1by silentmercenary45,827 views
- 1:42
Review of my JG M4A1 - high rof setupby z4z0001,455 views
- 0:32
mon taurus pt99 airsoftby faydit45,293 views
- 6:44
jg m4a1, g36 ,and mp5-j comparisonby stfuBUDDY13,971 views
- 3:29
New JG M4 Video Reviewby danponjican23,265 views
- 1:08
my custom moded airsoft well R6 (m4a1) CQB monster! AG85by airsoftguy8520,286 views
- 4:35
AirsoftMegastore JG M4A1by sk8erdude76212,318 views
- 1:18
jg echo1 m4a1by boston2008champs1,892 views
- 1:58
JG M4A1 enhanced version airsoft review (Part 1)by Th3A1rs0ftChann3116,569 views
- 0:58
JG m4a1 firing reportby Th3A1rs0ftChann313,939 views
- 0:53
2008 JG M4A1by ImportAction8,090 views
- 4:46
Bowser's Airsoft Gunby corruptcrew125,036 views
- 0:45
Aisoft G&P Cqb-r carbine , Systema Turbo, Fast ROFby xxthedrizzlexx4,877 views
- 6:07
Re: (airsoft) JG M4A1 reviewby warpony766,524 views
- 7:57
JG M4A1 Carbine 2008 Version Shootingby RICEKING2125,782 views
- 6:21
cheap airsoft grenadeby sesoccerstar0990,574 views
take it apart take off the stock, then there should be 2 screws on the buffer tube like nickyjive said then tighten it or even glue that screw again to make sure that never happens again
rockerairsoftman 4 years ago 4
there should be screw inside the buffer tube that you can tighten...instead of pushing the lever up on the stock to retract it, pull it down and the stock will slide all the way off the tube. there will be a cap at the end of the tube take out the screw holding that cap. and then shine a flashlight down the tube, you should see a screw in there. try tightening it, and you should be all set.
nickyjive 4 years ago 2