BRATIGEL Modularsystem mit 16 x 8 Dual Stepsequencer

Bratigel 16 x 8 Dual Analog Stepsequencer - max.128 unterschiedliche Steps in one shot mode. Transpose Track ,max 16 Steps lassen sich 8 x transponieren. Der Transpose Track kann von der System Clock oder vom Resetpunkt der beiden anderen Spuren und auch von Gate Track 1 der Triggerschalter !!! kontrolliert werden. 16 x 3-fach Switches für Triggerbus 1 und 2 sowie Step off. Hi End Sequencer mit hochwertiger Hardware. Alle Ein-und Ausgänge 6,35mm Klinke Gate/Trig = 10V positive, Moog Out ist neg SwitchTrig.

Bewußt ohne Beschriftung um das edle Silber design nicht zu stören .
Bratigel 16 x 8 Stepsequencer - 128 different Steps in one shot , you can add and transpose the third Track to Track one and two,The Clock of third Track can switching on System Clock or Reset from Track one and two. Trig Pulse for each Step can be switching by the 16 three way Gate Switches to two gate Outs. 16 Hi End CTS Potentiometers on gold plated PCBs, 8 Preh Metal Potis ,three Voltage References, Positive Gate Out and Switch Trig Out for Moog Synthesizers,Start and Stop Jacks and Ext.Clock In for LFOs. Hi End FG (Grigelat) Power Supply . Big Alu 19" Rackcase.

You have the first time a normal sequencer with 2 x 1-8 Steps dual mode with 2 CV outs or single mode 1 x 1-16 steps at 1 x CV Out.CV Out is switchable, 1 V or 5 volts. Internally adjustable to 7 volts. At 16, trigger switch 3 times you can switch to 2 Gate buses. This allows the steps skip out.Gate is normal positive 10 volts. Clock Out is 10V or switch Trig. for Moog. In addition, a second sequencer comes with 1-8 steps. This can be controlled you with internal (or external) clock will run parallel to the first Sequencer with separate CV out (internally adjustable 1-5V) or via the adder circuit, the voltage of the second sequencer you can add to the first sequencer. Then the second sequencer can also go through the reset of the first,the internal or ext.Clock and the Trigger Bus 1 from the 16 Trig.Switches !!! to be controlled by adding the control voltages (switchable) gives himself a transposition of the first two tracks. Running mode is either the internal clock or external clocks (VCLFOs). One shot goes over the final reset output to the Stop input. In/Outputs on left Side: Start-Stop-Ext.Clock-Gate Out-SwitchTrig.Out Outputs on right side CV Out Track A -Track B-Track C- Final Reset - Gate/Trig 1 - Gate/Trig 2.

Pure analog technology - NIX MIDI !

Maße: 19 Zoll 483mm breite ,220mm höhe,250mm tiefe 220V

Sehr Service freundlich, alle ICs gesockelt . Front mit kompl. Elektronik läßt sich ohne Werkzeug öffnen und rausziehen ,einfach 6 Rändelschrauben lösen und Stromversorgungstecker ziehen.Netzteil kompl.separat abgeschirmter Einschub von FG in der Rückseite.

Category:

Music

Tags:

• analog
• Sequencer
• Moog
• DIY
• bratigel
• Modularsystem
• Arp