DIY Digital Temperature Controller
Loading...
Uploaded by trytodiyguy on Oct 30, 2011
Digital Temperature Controller Build - *Note* - Electricity can KILL you, do not attempt unless you are capable of handling this type of project. Also, The controller shown in the video comes in both 110v and 220v versions. Double-check your application before purchasing. Also, wiring may be different per controller, wire per your controller manufacturer recommendations. The wiring used for this controller was specific to the controller used in the video.
- 37 likes, 0 dislikes
-
Link to this comment:
Uploader Comments (trytodiyguy)
All Comments (27)
-
Thank you for this video, I am trying to build a controller for a Humidor. I will use a 12V peltier plate to both heat and cool when necessary. Can your controller handle this application? It heats when the polarity is one way and cools when it is the other.
-
@aquafresh1208 Sounds good... be sure to post back and let us know what you find out. Thanks!
-
@trytodiyguy thanks i'm looking forward to the responds
-
@Driver05t According to sellers on ebay, it seems the 220v version is rated for 10 amps, but I can't find what the 110v versions are rated. However, like I said in the video... I would ask a licensed electrician and the manufacturer of the controller any questions you have to confirm that or if there's anything you need help with.
-
@aquafresh1208 I have not tried to place my probe in water. However, the probe on these looks to be fully coated, and since you will find them labeled on ebay as "aquarium" controllers, I would guess they are water-proof. I could test mine out in a cup of water, but that wouldn't be the same as long term in salt water... so I can't confirm for sure. I would email the company and ask them.
-
Whats the max Watts on the stc-1000?
- 3:33
Fermentation controllerby leedsbrew821,217 views
- 1:33
Electronic Thermostat wired to fan and Flex Wattby incubatorwarehouse2,153 views
- 1:25
Testing the STC-1000 temperature controller.by LoveBrewingCompany2,178 views
- 5:32
Making a temperature controlled switch (thermostat)by BackyardAmusement11,965 views
- 1:27
wine bottle cutting with stringby amguate528,086 views
- 3:39
New Home Made Incubatorby Deadb4imgone6663,528 views
- 2:43
Hilarious Commerial!!by slim2open35,731,707 views
- 4:00
Homemade incubator cheapby ray76058110,922 views
- 2:31
Sure Electronics CD101 PID Controller - Stop mode issueby TheMightyOhm3,854 views
- 9:48
i got arrested 4 posting this vidby SickNick697,253,773 views
- 6:42
Top 5 adverts YOU WANT TO SEE THIS!!by stompman10112,886,564 views
- 4:01
AVE 1000 digital temp. controllerby coolbreezeth5,027 views
- 11:44
Kiln Controller - Wiring the n2006p PID temperature controller and adjusting settings.by calebp95033,771 views
- 8:58
DIY Bottle Cutterby trytodiyguy6,556 views
- 2:59
Digital Temperature Controllerby ChipDipvideo10,580 views
- 1:36
DIY Project 11by cytrontech9,526 views
- 5:45
Brew Controller Previewby blackheartbrewery4,140 views
- 1:35
DIY CHEAP CHICKEN EGG INCUBATOR FANby london18174,461 views
- 7:50
How to make an Egg Incubator (Part 3)by incubatorwarehouse8,726 views
@tryodiyguy this seems like it would work well for a incubator
Fapfapfa 1 week ago
@Fapfapfa I will take your word on it. Lol... I have no clue how an incubator even works.
trytodiyguy 1 week ago
What controller did you use, 110v or 220v? I'm also a home brewer I just ordered 110v off of eBay, hope its the right one
Hankflo51 1 month ago
@Hankflo51 I used the 110v because that is what my chest freezer runs off of. It just depends on your application.
trytodiyguy 1 month ago