350z common window problem
if you've been having trouble with my 350z passenger side window
IN CASE the window would not auto close properly
Or go all the way to the top before dropping down about a quarter of the way again.
AND you want to solve the problem.
TRY the Window Regulator Motor Reset Procedure. It SHOULD work again properly
SERVICE PROCEDURE
1. Remove the Door Panel.
^ Refer to the applicable Service Manual for Door Panel removal instructions
2. With the door open, lift UP and HOLD the Window Switch until the Window is fully closed.
^ Do not use the Window auto-closing function
^ Do not release the Switch before the Window is fully closed
3. Get inside the vehicle and close the door.
^ You need to close the door so the Door Switch is fully depressed
4. Press and HOLD the Window Regulator Motor Reset Switch. While holding the Reset Switch, press DOWN and HOLD the Window Switch until the Window is fully opened.
^ Do not use the Window auto-opening function
^ Do not release the Switch before the Window is fully opened
5. Release the Reset Switch. Then, lift UP and HOLD the Window Switch until the Window is fully closed.
^ Do not use the Window auto-closing function
^ Do not release the Switch before the Window is fully closed
6. Open the Door to release the Door Switch. The Window Glass should partially move down.
7. Re-install the Door Panel.
my window is stuck about an inch from the top ( so is cracked open just a little) and it wont go up or down!!?? i took it apart and its on its tracks. i guess the window motor just died?
kylezanewillcut 1 month ago
i I CAN FIX THESE WINDOW MOTORS CHEAP!!! VETTEKID407@YAHOO.COM
vettekid407 2 months ago
What a horrible video
wrice4 4 months ago
if you follow instructions it will work awesome video
TheCody911 5 months ago
Great tutorial... A must-watch after changing out window motor !!!!! Thank You !!
companerox 7 months ago
do u have a video with sound
spns350z 1 year ago