08 Electric Varadero motor mount marking
Loading...
Link to this comment:
Uploader Comments (evmotorcycle)
All Comments (4)
-
Cheers for the advice SirTragain. My marking system is a bit ad lib to say the least! :) Next motor mount that is made I will certainly be thinking a little more clearly on how to make it up. It works none the less! :) Glas you like the vids. I will try to get another done over the weekend if possible.
-
Basically creating two right triangles with the X being the Hypotenuse of each respectively.
-
If you made your two scribe marks 230mm apart then center radius (plural: radii) will be half the diameter at 115mm which could be verified by "X" making the spot; just drawing from upper left too lower right and upper right too lower left of the two perpendicular scribed lines.
-
For my battery racks i used aluminum angle welded into boxes which were then formed into a battery tower with more angle. Then to hold the batteries steady i used a few large tie down straps.
9:4509 Electric Varadero motor mount holesby evmotorcycle2,984 views
- 9:5320 Electric Varadero wiring and run testby evmotorcycle9,549 views
- 7:2911 Electric Varadero drive chainby evmotorcycle4,549 views
- 7:5010 Electric Varadero motor mount plateby evmotorcycle7,480 views
- 8:1107 Electric Varadero battery spaceby evmotorcycle2,431 views
- 1:5401 Electric Varadero donor bikeby evmotorcycle3,992 views
- 3:5018 Electric Varadero Rolling Chassis Rebuildby evmotorcycle10,615 views
- 3:24SOLENOID MAGNET ENGINE electric MOTORby mrpete22215,258 views
- 8:4417 Electric Varadero Battery Cageby evmotorcycle2,543 views
- 0:41Model steam engine electric generator DCby santape101,268 views
- 6:1512 Electric Varadero gets some juice!by evmotorcycle8,247 views
- 8:0105 Electric Varadero removing tiresby evmotorcycle3,349 views
- 4:30Electric motor assemblyby gotchacam234,008 views
- 6:0519 Electric aprilia RS street rideby evmotorcycle6,794 views
- 5:0625 Electric Honda VF750by evmotorcycle14,441 views
- 1:47Electric Motor by Deuexxby deuexx251,948 views
- 4:2504 Electric Varadero stripping the frameby evmotorcycle1,557 views
- 0:47Electric Vehicle ( EV ) Motor installed and wor...by Ba1100ns145,281 views
- 4:26Experiment: electric rotor, easy to implement.by Roobert33199,444 views
- 1:3626 Electric Honda VF750 Burnoutby evmotorcycle14,224 views
I used angle too, but it was steel.... weighs 13lbs right now... You can always improve it later. Its your first bike right? Mine too, and there's always room for improvement.
frodus17 3 years ago
Yeah this is my first bike so I am looking for materials that I can work with easily at home. In the future I will use aluminum! I have another bike in the pipeline also but not giving away too much on it for the moment. :)
evmotorcycle 3 years ago