Prototype Pan/Tilt Autokap Rig
Loading...
Loading...
485
views
Loading...
Uploaded by jumbocruiser on Feb 12, 2010
Prototype, single sided, single motor pan & tilt AutoKAP rig in mid development stage.
This is my first experiment with kite photography.
The rig uses a modified S3003 servo, Technic Lego 24 and 8 tooth gears, two worm gears and a 555 timer circuit to provide pan and tilt actions.
Eight cycles of the pan axis gives a single cycle of the tilt axis.
The timer circuit is fully adjustable, currently driving for 2 seconds and pausing for 2 seconds. The plan is to synchronise this with a CHDK intervalometer.
Total weight approximately 400g including camera and all batteries.
MUSIC:
Mainsail (Momentary Sound Action) courtesy of YouTube Audioswap.
0:35
Pan / Tilt AutoKAP Rig 13/02/2010by jumbocruiser894 views- 1:11
RC Camera Rig for Kite Aerial Photoby chitokuyato635 views
- 0:33
Autokap Rigby 3goldfinger1,644 views
- 0:24
555 timer as a servo controllerby Antipico51,877 views
- 1:55
Arduino High Speed Photography Triggerby bj010507769 views
- 0:55
The kit.wmvby spex357338 views
- 0:34
Piezo trigger flashby detvarmegja276 views
- 1:30
Motorized pan Tilt Headby sonyaanddaniel1,250 views
- 65 videosRC heli
- 0:25
Motion Tilt /Pan HID USB Mouse using PIC18F2550 (Source Code Available)by starlino5,370 views
- 0:39
pan tiltby alonso0623,520 views
- 2:10
3-axis camera gimbal for GoPro (assembly and servo test)by helixdesign59,449 views
- 0:32
New RIG (2)by 4510waza119 views
- 0:43
Pan/Tilt 2.0 Operationalby 1kreature2,295 views
- 0:39
Agility - Gnome Stronghold (61k-65k XP/Hr)by Extremption619 views
- 3:59
PPT BEAKby mopedDrachen1,121 views
- 1:40
KAP Rig - Kite Aerial Photographyby ed4wb17,001 views
- 1:02
Pulse LED circuitby xcentriqx8,402 views
- 0:40
Differential-drive pan and tilt mechanism, Lego Mindstorms NXTby jaydavey92,896 views
- 1:01
SunSPOT camera rig for kite aerial photography (KAP)by guybrownphoto5,038 views
Thanks for your comment, I still have some fine tuning to do.
The camera is heavy at the battery end, I can add spacers between the timer enclosure/battery box and the frame to ballance things out side to side, I can also make the camera slide back and forth to ballance it that way.
I was careful to pivot the tilt axis through the CofG of the camera, and am happy with that.
jumbocruiser 2 years ago
The swing of the picavet seems to show that the weight is not balanced.
scottdunnTUBEYOU 2 years ago