over lifting union 3621 BS locks
Loading...
Loading...
3,894
Loading...
Link to this comment:
Share to:
Uploader Comments (happylocksmith)
see all
All Comments (5)
-
very nice...
-
What success rate are you having with overlifting curtained locks ? I'M currently on 5 out of 10 with overlifting wires from island locks.
-
Oops, I meant you arent supposed to be able to overlift them.
-
You aren't supposed to overlift them...there must be something wrong.
Loading...
- 12:55
Lock Picking - Lever Lock Overlifters - Diy Wires and keysby jaydorner6,909 views
- 4:26
ERA open with a homemade overlifterby pickwizard6,076 views
- 4:35
Picking a Chubb 3G114by happylocksmith5,218 views
- 1:09
Interesting method of opening of cylinder locksby DoorTester59,207 views
- 1:02
overlifting an era bs mortice lock.wmvby locksmithstraining4u994 views
- 0:59
Lock Picking - Union 5 Lever security mortice Dead Lockby jaydorner71,271 views
- 8:47
Era Enduranceby littleandy1193,964 views
- 1:20
BS3621 SashLock Picked in 11 Secondsby ursusarctosuk1,349 views
- 1:48
New Mortice Lock Identification Manualsby littleandy1191,984 views
- 0:53
mortice pick ,by keyresponse869 views
- 2:20
7G Interchanger adapter system by Simple Solutionsby mickr534,538 views
- 2:29
Overlifting Mortice Lock 5 Lever ONE HANDEDby nickhonda1584 views
- 2:00
DIMPLE RAKINGby rix0773,252 views
- 9:33
Lock Picking - Chubb 3G114 Lever Lockby jaydorner19,613 views
- 2:08
Chubb Mortice Lock Pickedby ursusarctosuk11,558 views
- 0:32
2 in 1 pickby THENELLMAN1,697 views
- 3:00
Guide to Mortice Locks - Part 1by sneekypeeks22,342 views
- 0:50
ICL Curtain Pickby Dogzbody33726,735 views
- 4:09
Picking Legge BSby happylocksmith547 views
- 4:22
how to kill a mortice lockby littleandy11924,151 views
Hi
On unions its 8/10 on the job I will always pick as opposed to over lifting this is something I will do on the bench as for wires I have always made my own I take accurate measurements from the depth and height of the curtain, levers sure its easy to make a universal wire but will not always work as there will be a short fall somewhere along the line. Why don’t you study the locks you cannot over lift and find out why it will only be one of 2 reasons or both perhaps a custom wire will help
happylocksmith 1 year ago
Yes you are right in your thinking but take a logical re think and it becomes clear but it is all down to the lever set up. How is it possible to rake one pin tumbler but not another the answer is in the setup of the pins think of the levers as pins and its no different. There is nothing wrong either way just a flaw which can be exploited.
happylocksmith 3 years ago