Kicker amp help! It turns on and off!
Uploader Comments (sfchawks01)
All Comments (9)
-
MINES DOING THE SAME THING, ITS BEING A FUCKING FAGGOT!!
PLEASE SOMEONE TELL ME HOW TO FIX!!!!
-
thats how my amp kinda is but it only goes on for like 5 secs when my i turn my car on then wont turn on :/.
-
a friend of mine had the same problem while his amp was set to audio sensing. Which remote turn on do you have the amp in? There was: 12v, DC Offset, and Audio Sensing. This problem is usually caused by the wrong settings while in audio sensing. Try setting the amp to DC Offset. The Audio Sensing is for input levels around 5v, and if you have a factory amplified system its probably around 10v and above, so your amp should be in DC Offset. Also make sure your High/Low input is set correctly.
-
did you ever find out what was up with the amp?? mine is doing the same thing and i need some advice
-
i have the same problem but im powering the amp with a psu.. i plug in the psu into the amp it turns on for a sec and turns off ...it use to work but idk wat happen and i tested another psu and the same problem plz help
-
calling the amp a "faggot" is not gonna get it fixed any faster....
-
@sfchawks01 how did that work out for you? Didi you find the problem?
check your power and ground and remote. take them all the way out of the car if you have to and visually check to make sure nothings wrong with those then run them again. I hope its not the amp.
shanklin07 1 year ago
@shanklin07 me too!
thanks i will try that today
sfchawks01 1 year ago