(HD) EVGA GTX 285 Classified GPU in 4 way SLi
Uploader Comments (trubritar)
Top Comments
-
If i had 4 of those in SLI i wouldnt leave my house.
-
How do these breath in SLI??? Looks like there is only mm between the cards!!
All Comments (370)
-
@shiftymeister Lol no. 1500w is enough.
-
2 of these are going to my dream PC
-
@roguegamingpc Usually they have a cutout on the PCB to make a tunnel for the air to flow but surprisingly I don't see one on this board.
Still the PSU requirements for 4 way sli on these is just crazy. 12 6 pin connectors...and 2 power supplies is the only logical way to make this stable.
-
@R4Zy3L It's still more surface area to dissipate heat and the airflow in your case will help with that...same as the aluminum shroud all the way around the card or the backplate they sell for the 470/465s. It all gets heated up by the components and cooled by the air in your case. With decent airflow in a case it could be a couple degrees C drop easily.
-
3 6 pins are crazy on one with 1gb of gddr3. Even if you were overclocking.
-
can i use only two of them on the motherboard(evga x58 4 way sli classified motherboard)
-
8 GPU"S.correct ya maths.2x4 equals 8
-
How dose that heatsink on the back of the card provide additional cooling if the fan has a cover that blocks it from pulling air from that heatsink?
-
I HAVE THE POWERRRRR!!!!
-
@AmericasArmy96 That would be 8GPu's and it's not possible to do 4 way sli with 9800GX2's :P
Are you Welsh?
wayne205stevens 1 year ago
@wayne205stevens Yes, i'm originally from Wales.
trubritar 1 year ago