Reflow Soldering CREE LED
Loading...
Loading...
13,793
Link to this comment:
Share to:
Uploader Comments (Extremflug)
see all
All Comments (7)
-
If I wanted to solder the LED to the board, could I heat the back of the board with a soldering iron or would that not work?
-
Keep in mind that LED structure is a crystal. By cooling it in a water, You 're shortening its life around ten times. On Cree homepage is preety big tutorial about soldering them. I make LED lighting for living. Trust me. Things like that only kill diodes. It's 100 times better to let it cool on its own.
-
Excellent, very nice video, interesting, Thanks
You can also see my video, cree led and with solar
Congratulations and Good Continuation
-
WOW.. you touched the heatsink star? I had to use a rock to separate mine it was so hot.
Loading...
- 1:05Soldering Cree XR-E "Emitter"by koalacpf51,078 views
Featured Video
- 1:21How NOT to solder / Tin Cree LEDsby reefledlights11,509 views
- 4:37How to Solder 70 LED's in 4 minutes.by bg1139018,082 views
- 3:51DIY Toaster Reflow Solderingby undergroundengineer4,718 views
- 2:21Small Oven SMD Reflowby neikorea6,079 views
- 2:16Solder a High Power Cree MC-Eby designer2k221,420 views
- 0:25LED Liquid Lightbulb by Liquid LED at CES 2009by ROCKETBOOM289,410 views
- 2:42How To Solder a 0603 LEDby l0rdnic014,632 views
- 1:53Kitchen SMD reflow solderingby KapteinKUK14,793 views
- 1:41Cree solderingby smoqreefer4,323 views
- 1:37Cree: Anatomy of an LEDby arrowunplugged3,425 views
- 1:53led solderingby capaelectronic1,744 views
- 1:07Reflow solder extreme close up (solder paste, h...by smbakeryt9,042 views
- 9:33Cree-XRE-Solderby MuvoTX7,448 views
- 13:49Rickets Reef: DIY LED Light Fixture Pt. 3by 1mkwiet38,442 views
- 0:19Toaster Oven Reflow Soldering (HD)by hpux7354,865 views
- 0:14Another Toaster Oven Reflow movie (flipbook)by hpux7351,645 views
- 5:39Hot air gun reflow soldering, atmega128Lby robm111141,793 views
- 3:56Elektor's SMT Oven for reflow solderingby ElektorIM42,718 views
- 0:40SOLDERING LED SOLDERINGby PROMATION11,156 views
is it possible to solder the emiter onto the star in an oven? or would this damage the emitter?
monkey08642 1 year ago
@monkey08642
It would be possible.
But, as I found out recently, heating the whole part from underneath with a hot air gun works better and faster.
Extremflug 1 year ago
Well, a split second touch does not transfer enough heat into the skin to cause severe burns. It's like moving the finger quickly through a candle flame; we all did this as kids :-)
But recently, I found out that it is much simpler to put the basis in a third hand, and to heat the thing from below with a hot air gun. Then remove the Cree with tweezers. Place it on the other base, heat it from below, too, done. Much simpler.
Extremflug 3 years ago