Jim Tolpin flattening boards with Handplanes (Part 3)
Loading...
Uploader Comments (TimLawsonPTSW)
All Comments (4)
-
@gerbschmitt board down and planed the middle to match edges youd go right throught the board. or if you started on the opposite side youd make the board much narrower as only the very middle of the board would be touching the table. sorry for lack of pith and clarity.
-
i have a total neophyte question.say i had a wide board with a severe cup (not sure if that is right word. i mean where the board is much higher in the middle than edges). I dont really want to to plane that cup out as that would make the board very thin. it is for a plank floor and will be face nailed down. i just want to make 3/4 thickness all around. do i need to clamp board down when planing?i hope i am describing correctly. i have some boards that are so bad that if you simply layed the
-
Nice, someday I hope to be able to do that
5:59
Scrub planeby ac445ab4,764 views- 4:45
Jim Tolpin flattening boards with Handplanes (Part 2)by TimLawsonPTSW6,155 views
- 0:41
Scott Horsburgh's Hand Planing & Shooting Techniques 1by Burghsy27,495 views
- 11:15
How to Flatten Plane Soles • Complete Sharpening Series Video 35by askwoodman4,645 views
- 2:57
Jointing with a Drawknife and Handplaneby TimLawsonPTSW3,762 views
- 1:45
Chris Schwarz | The Last Word on Sharpeningby popularwoodworking9,785 views
- 0:11
Working with Japanese Handtools 54.movby TimLawsonPTSW10,262 views
- 2:27
Messageboard Grinderby MrSrslySirius1,340,797 views
- 7:50
How I make my mini-planesby Stephenmboone9,925 views
- 3:00
Matts benchtopby localele16,051 views
- 0:23
Jim Tolpin flattening boards with Handplanes (Part 1)by TimLawsonPTSW4,057 views
- 0:41
Helle Thorning nøgen på talerstol (hemmeligt klip)by p10trxs0hn7,473,284 views
- 3:03
reclaimed wood topby sowason210,927 views
- 0:50
Jack Plane - Scrub Planeby gus19662,439 views
- 0:42
Using a plane to flatten and smooth the surface of the spruce woodby dweinberger124,293 views
- 5:29
Building my portable hobby sawmillby Matthiaswandel27,420 views
- 9:23
Intro to Hand Plane Tuning Part 1by shelterinstitute7,201 views
- 7:36
The Down to Earth Woodworker - Making Legs - Part 1by HighlandWoodworking12,297 views
- 5:32
Scrub planeby tonystuart23,382 views
@gerbschmitt If the board is that badly cupped. I'd recommend that you rip the board in half. Flatten the two boards and then edge joint and glue back together. Do it carefully and only a good eye will spot the join. Good luck.
TimLawsonPTSW 6 months ago