Traxxas Rustler w/VXL 3500kV, MM ESC and 4S Li-Po 82mph (4)

Finally broke the 80mph barrier... twice. Once geared 40/68 and the second time geared 40/76. I stripped the 68T spur soon after the 82mph run. I feel that more speed is possible with that set-up.

Update: check out the latest video of it running 90mph!!!

Category:

Entertainment

Tags:

• Traxxas
• Rustler
• Velineon
• VXL
• Mamba
• Max
• 4S
• lipo
• Brushless
• 14.8V
• fast
• fastest
• rc
• 82

[TheAL3xGR]

This is fast!!!

The air doesn't flip it?

Nice vid

[sunnyhoutx]

@TheAL3xGR Thanks. I put front and rear wings on to help the car stay on the ground.

[2007tacoma]

im with gagetrumbly, i have it stopped right at 11 seconds, looks just like a buggy, or an F1 car

the tires are way too thin and small

im not doubting you its a rustler... but its not a stock one, most everything is modded on it

[sunnyhoutx]

@2007tacoma You both got it right. It's been a well known fact that this Rustler was highly modified. everything was optimized for speed and down force. The body was a Bandit body from JConcepts and the front wheels were also Bandits Anacondas.

[gagetrumbly]

its not a rustler pause it at 21 seconds and look

[sunnyhoutx]

It's a Rustler with a Bandit body and a front wing attached.

[janeybabes76]

your mouth is disgusting you need to grow up and be a man if you can what the sucking got to do with traxxas vxl get a life you sad person good bye

[scrivtwin2]

how about not being a dumb ass and free wheeling to hell.lol

[hockeydude5122]

can you tell me what gears you use?

[draven3907]

103mph!! rc car with a 2200kv mamba monster motor that rev's to 60,000rpm Look at the vid!!!

[hockeydude5122]

are you using 32 p gears?

[nabilgravityoxygen]

I have interested in keeping my motor temp under 150F for the entire battery but go as fast as 45mph. With 3s and 25/76, the motor reaches 170F in like 7-8 minutes.

Yesterday, i tried 4s (using my friends 4S compatibility esc) on VXL motor. My gearing was 25/76. The motor got to 170F in like 3 min. If i use 18/86 gearing, will I be able to achieve my objective? Will the high RPM in this setup produce a lot of heat, although there will be less amps due to high volts? Thanks

[traxxxxxxas]

hey I have a mm with a blown bearing in the 5700. I heard I can get more torque from the traxxas 3500kv. Can you give me some pointers?

[VideoGamePlayer12]

Maybe he's using the mamba max pro, which take 6s and made a typo