HUGHES 500D BLADE 400 HELI ARTIST FUSELAGE
Loading...
Link to this comment:
Uploader Comments (1BLADESHY)
All Comments (11)
-
Thank you now you resolve my problem, keep flying :D
-
just make sure the direction your servo moves stayed the same. sometimes turning the gyro will reverse the servo direction :-)
-
Oh thank you, any setup for the gyro after turned 90 degrees ?
Thanks for your quick response
-
i am using a gy240 gyro and it fits fine. when i had the eflight gyro i just turned it 90 degrees so the wires run parallel with the tail boom
-
I have the same heli and fuselage but i have a little problem,
the Gyro don't fix inside of the fuselage, where did you put the gyro, i'know it must to stay in vertical position with de led light in direccion to the tail boom. Thank you!!
-
How much work/problem solving did this project take? I am not a builder but interested in making my blade 400 look just like this. How did it fly compared to pre-scale looks? Thanks for any info.
0:24Hughes 500D 1st Flight Part 1by knockoffs28,608 views
Featured Video- 6:48MD 500 Trainingby gshawnadams34,738 views
- 0:39Trex700 Flybarless GYROBOT 900by umranrc6,831 views
- 2:59Blade 400 Vs Trex 450by genettico81,277 views
- 2:52Falcon 3D art-tech with Hughes 500 Fuselage , F...by maki2119719,719 views
- 1:28Eflite Blade 400 helicopter with Apache bodyby mdbuehler11,905 views
- 1:04Align Trex 450SE V2 in Heli Artist Jet Ranger Bodyby robdavtay49,253 views
- 4:09HeliArtist MD500 E-Flite Blade 400 Build and Hoverby saitoking30,459 views
- 1:27Hughes 500E :Prova Hoveringby sdprca4,455 views
- 0:57Blade 400 3D Apache, armed and patrolling the y...by mdbuehler42,198 views
- 1:33Blade 400 Hovering OK!!!by sabota233,712 views
- 1:38Hughes 500by germancopter175,626 views
- 2:51T-REX 450 Hughes500D Armyby lingkithung77,368 views
- 3:10Hughes 500D TOW Defender on Eflite Blade 400- M...by RCRedBaron6,549 views
- 4:4520080907 - 9 Weeks - Blade 400 w/Custom Fuselageby odam2k1,805 views
- 1:16Blade 400 in a Heli-Artist 500D V2 Fuselage w/ ...by qsecgtyhd1,240 views
- 3:26Scale 500e body with Blade 400 Inverted hover.wmvby hitman1027661,047 views
- 3:04My Blade 400 with Huey fuselageby hrbeta7,280 views
- 2:12Hughes / MD 500 HA-RTL helicopter / Engine star...by hhelikopter54,010 views
- 1:51Fusuno A109 with Blade 400 mechanicsby pilot482747 views
Nice photos...let's see her flying
SuperWildman69 1 year ago
Sorry to say it ,but she's no longer with me. She met her doom as a result of dumb thumbs,but there is video of the first test hover on my channel. Thanks for the comment :-)
1BLADESHY 1 year ago
need to know if you left the tail boom suport,i put my and left suports off and i lost all,bad viabration,,joeriver92
Joeriver92 1 year ago
hey,i removed the supports, you have to to install the fuse. the heli in the vid i had no problems with. the second one i built has a trex 450 in it and it has the same issues as yours it shook so bad it broke the mounts loose from the frame and bent the main shaft. don't know why, still trying to figure it out. if you solve the problem first let me know. i'm going to check on helifreak,there is alot of good info there. good luck :-)
1BLADESHY 1 year ago