Cisco router IPSEC VPN configuration
Loading...
Uploader Comments (3CITech)
All Comments (10)
-
pretty good video. tnx.
-
very good video, thank you very much (from chile) but I would like to ask you something.... i doing this on packet tracert but sometimes whe I type a command the router does not responsed as in you router, does it a limitant of packet tracer??
and the other quiestion is about some commands that I saw in you sh run, that you doesn´t explained befor... is that relevant to have ping between the host and the gateways as you did?
can you make a tutorial about acl, nat and iptable pls?? thank U :D
-
Your video is quite good. You forgot to mention that you need a default route on each router. ip route 0.0.0.0 0.0.0.0 se0/0 on both routers.. You probably had the default route configured but you did not mention it to the users. Thanks. Ali.
-
thats good. thanks alot
-
good job, i need that help
-
Thank you man!
8:56
Realita Cinta dan Rock n Roll 9/12by sijeruk101,539,602 views- 2:11
los 15''by penmarin21,164,071 views
- 19:35
IPSec Site to Site VPN tunnelsby Keith678313,021 views
- 6:44
Overview IPSECby HiTechCollegeIL7,313 views
- 10:59
Creating a Site to Site VPN Using IPsecby CSSIAdotORG25,504 views
- 6:09
Networking 101: What is MPLS?by Cisco7,991 views
- 12:01
CISCO VPN SITE TO SITE BY IMRANby imeezz4,343 views
- 5:12
Cisco ASA 5500 Client To Site VPNby PeteNetLive4,484 views
- 12:19
VPN Site to Siteby learop19914,179 views
- 32:29
Tutorial: IPv6 Basicsby voxeovideos15,939 views
- 1:52
How To Setup Linksys E Series Routerby mgomez2651114,950 views
- 12:19
Linksys VPN Router RV042 Easy Setup for QuickVPN Part 1by JrJood14,278 views
- 12:05
Basic Cisco switch configurationby 3CITech13,018 views
- 16:04
Linksys VPN Router RV042 and Wireless Router WRT54G Configurationby shuvromcse3,259 views
- 7:52
Spanning Tree Protocolby ajiteshraj9,883 views
- 42:42
IPsec over a GRE tunnelby dsuida2,735 views
- 12:13
Configuring ASA for remote access vpn -PART1by banatukku6,040 views
- 4:45
Virtual Private Networks (VPNs)by computingstudies118,401 views
- 10:16
Configure and Install DNS on Win2003 Serverby mrholverson11,944 views
Not sure if use the commands for the vpn setup in Packet tracer . Show run command was only for checking the commands i entered. Has nothing to do with a VPN setup. i'm working on a NAT video this week.
Hope this help
Ron
3CITech 2 months ago
You're right, i did have the default already configuration. Thanks for your comments
~Ron
3CITech 3 months ago
Your are welcome, and thanks for the comments
3CITech 5 months ago