Starting Problems 14.5hp OHV Briggs & Stratton - Help!
Loading...
Loading...
6,835
Loading...
Link to this comment:
Share to:
Uploader Comments (Budnipper82)
Video Responses
This video is a response to ( HOW TO ADJUST VALVES) FIX HARD TO START Lawn Tractor with OHV Briggs Engine- MUST SEE- Part 1/2
see all
All Comments (25)
-
try and check the valve clearance and if its off then adjust the valves to the correct clearance and see if that did it rite.
-
adjust the valves
-
BAD CLUMPY OIL !!! PUT NEW OIL :D DON"T PUT TOO MUCH.
-
OIL !!! Drain the OIL - TOO MUCH OIL !!!
-
Yeah adjust the valves to something like 004 on your feeler gauge and it should be ok
-
adjust the valves those engines suck ass and they get out of adjustment so adjust the valves and it will run like new.
-
@Budnipper82 thanks alot, appreciate it
Loading...
- 5:18
Engine Miss on 14.5hp Briggs & Strattonby Budnipper821,147 views
- 4:45
Adjusted Valves on 14.5 hp Briggs & Stratton- Starts Betterby Budnipper822,377 views
- 2:29
Cold Start 14hp Briggs & Stratton (1/3)by Budnipper82871 views
- 2:06
16.5 b&s ohv problems!!!by rockstardrinker956,323 views
- 2:11
Briggs & Stratton Trouble- HELP!by Budnipper8214,053 views
- 0:32
Ignition Coil Testby jessedeblock9,564 views
- 3:14
Briggs and Stratton Ignition Coil Replacement (part #793353)by RepairClinic7,975 views
- 5:56
( HOW TO ADJUST VALVES) FIX HARD TO START Lawn Tractor with OHV Briggs Engine- MUST SEE- Part 1/2by donyboy7330,881 views
- 8:09
LAWN TRACTOR ELECTRICAL PROBLEM REPAIREDby 805ROADKING3,661 views
- 1:57
LAWN MOWER WIRING PROBLEMS!by tostermaster05011,540 views
- 1:58
Remove flywheel/stator without special tools.by cyrex68673,256 views
- 1:01
Custom Racing Mowerby SmalltownTractors24,976 views
- 10:00
GopherHaul 11 - Lawn Care Business Bikini Showby TeamGopher2,308,964 views
- 0:42
Craftsman Lawn mower will not startby kp288957,948 views
- 11:52
Governor Adjustment and How They Work Honda Briggs Tecumseh Kohler etc.by sixtyfiveford15,217 views
- 5:20
How to set valve lash on a Briggs and Stratton OHV engineby pivotboy639,546 views
- 1:59
Bean Station, Tennesseeby ThouShaltLaughComedy6,512 views
- 0:57
Testing the coilby iworby17,880 views
- 14:02
Lawn Mower Repair Valve Adjustment Briggs and Stratton V-Twinby lucaslst14,734 views
i have the same motor and for some reason the motor wont even turn over. when i turn the key it just clicks any thoughts?, i just put a new solenoid switch in it, and swapped the starters with one from my other 14.5hp motor and it did the same thing. HELP PLEASE!!!!
Shrpshooter99 2 months ago
@Shrpshooter99 . I fixed mine. It is most certainly the valves are out of adjustment. I will send you a good video on how to do it. Good luck.
Budnipper82 2 months ago
I've rehoned the valves on mine and it's the exact same model and engine and the valves still act the same it's just the battery connection or the starting solenoid has a weak connection and my rig has a burnt exhaust valve and has a loud back fire when you kill the engine.
Decy8844 3 months ago
@Decy8844 .... Actually it was the valve adjustment. The starter was good as I changed it out with another one just like it as well as the solenoid. I adjusted the valves and it starts like it is suppose to now. You are probably not adjusting them the right way. Make sure you adjust them when the engine is cold as well. Good luck!
Budnipper82 3 months ago
donyboy73 has a great vid of this problem on the same engine in his channel....
tucksbestproduction 8 months ago
@tucksbestproduction Thanks tucks... Just watched the vid and looks like that's the problem. I'll see what I can do to fix it. Thanks, Brett
Budnipper82 8 months ago